2024 RCSB 4x4 Carbonized Gray!

[highvoltman]

All I did was bend the neg terminal down and slid it 4 inchs and it passed tec inspection at the strip this past weekend had to re plumb and get rid of the wipple over flow tank but it works like a charm

Sponsored

 

[highvoltman]

And the spillage is me taking the ice bottles out of the coolant

 

[H82bbad]

Okay I've done some more upgrades and have a few more on the way.
I met up with Brian B in WV and picked up his Carbonized Grey stx grill

 

[H82bbad]

Then I went online at my favorite salvage yard and found a column shift console. I got it for a great price (650)so I wasn't expecting much. Figured I'd have to add the filler panels etc but much to my surprise it was all there and in way better shape than I expected!
I was also a work station consoles which I really liked but didn't know at the start! Lol
Also visible in the pic is the factory raptor wheel with paddle shifters and boostedgreygoose designs harness.

 

[H82bbad]

Work in que
I have ported SPD manifolds I got from American trucks for a super deal. (480) And a SPD Alpha catted y-pipe (1649.00) this one took some time to get because AT sold too low and made SPD mad. But they honored the price and shipped it to me once SPD started shipping them out again.

I also have a front torsen diff to install from the Ford website, 20% off sale plus Ford pass points it was a steal. And an Eaton truetrac I grabbed from eBay for 650. New bearings and races for both from my local dealer.

And a carpet kit from rockauto. I would have done this already but I want to attempt some sound deadener when I have the rubber floor pulled.

Also need to install the 5* tuning Dyno switch.

 

[H82bbad]

Gosh I also picked up a set of forgestar 17x9.5 wheels and 305/45r17 nitto drag radials. Big guy in little shoes.

 

[highvoltman]

Love that gotta have traction if I was not so far I would love to run them gentlemen style

 

[H82bbad]

Love that gotta have traction if I was not so far I would love to run them gentlemen style

It's slow, will be till tuning opens up best so far is 11:20s on draggy. Full weight.

 

[highvoltman]

Ran a 9.6 @146 at maple grove test and tune they were not happy

 

[Larrymoe]

Then I went online at my favorite salvage yard and found a column shift console. I got it for a great price (650)so I wasn't expecting much.

What site is this?

 

[H82bbad]

What site is this?

https://schramauto.com/parts/ delete if not allowed

 

[H82bbad]

Ran a 9.6 @146 at maple grove test and tune they were not happy

Yeah life stinks with an untunable truck ? I came close to selling it and buying a 2020. Love the truck but the tune lockdown is killing it.

 

[highvoltman]

Yea I was lucked out with a 2023 and five star dyno pro tune

 

[H82bbad]

Y pipe installed. My quiet 3 inch mbrp is now loud. ?? But it has a good sound.

 

[H82bbad]

Good day today. I updated my fuel system with JD stage 2, swapped injectors to fic 1000, the tuning was done by Kris Preaux. Pump E85 for Fuel
Got a chance to get on the Dyno today.
765/571 on 3.875 pulley
822/617 on a 3.625
Very happy with the results. Stock manifolds and SPD y pipe.

Sponsored