nahs26
New member
- Thread starter
- #1
At first it was flickering on and off 50/50 while displaying pro power onboard not available message. Now it’s off pretty much for good but flickers on randomly for a second. When it flickers on everything looks normal except for the PPO message.
Took the screen out and unplugged/replugged everything on it and the APIM. Tried hard reset in forscan and the soft reset (volume/seek forward) no avail. Error codes were something like UXXXX in the PCM stating invalid data from APIM and the APIM had some codes stating display screen communication fault or something along those lines.
Thinking this it is either a failing APIM or less likely a screen failing. I haven’t done any OTA updates in over a year. Disabled because I’ve heard of issues after them. Almost 2 years in and no issues until now. Anyone have any ideas what might be casuing the screen to remain off?
Took the screen out and unplugged/replugged everything on it and the APIM. Tried hard reset in forscan and the soft reset (volume/seek forward) no avail. Error codes were something like UXXXX in the PCM stating invalid data from APIM and the APIM had some codes stating display screen communication fault or something along those lines.
Thinking this it is either a failing APIM or less likely a screen failing. I haven’t done any OTA updates in over a year. Disabled because I’ve heard of issues after them. Almost 2 years in and no issues until now. Anyone have any ideas what might be casuing the screen to remain off?
Sponsored
Last edited: