Search results

Shoot. That’s frustrating. It’s been a while since I installed those, so I don’t think I’m going to be much help. Is there anything I can check on mine that might help you out?

Not sure. I just thought that running it through the cross member would add some protection to the wires. Time will tell if I was correct or not.

Yep. Still no issues and have been very happy with them.

No I didn’t. Still no check lights or issues

I actually ran it under the truck through one of the cross members and then up through a plug under the drivers floor board. Didn’t want to have to deal with all the other interior stuff.

No I didn’t. Probably wouldn’t be a bad idea with winter coming this way. From what I have read of others, I don’t believe they had either?

Edit: 9/20. After posting on a FB forum. Someone mentioned that if you keep your foot on the step while it is open, then close the door, it might stay open. Well, this is indeed the case. Not sure if it’s necessarily good for the step, but the number of times that I would probably use that...

A really sharp utility blade and went nice and slow. Also, you’re able to remove the motorized portion by removing several bolts and then unplugging. Little bit of work. Some of the bolts are kinda hard to get to and one of the plugs was a pain to get loose. Otherwise, no codes or anything from...

Edit: 9/20. After posting on a FB forum. Someone mentioned that if you keep your foot on the step while it is open, then close the door, it might stay open. Well, this is indeed the case. Not sure if it’s necessarily good for the step, but the number of times that I would probably use that...

Do you know the part number on this. I tried searching from the numbers of your pic, but nothing came up. thanks.

Appreciate your insight. Thank you.

Copy. No check engine lights or warnings and “glare free” is on the menu and selected. That is without the IPMA change. Is the IPMA change still needed for proper operation of the glare free?

Still not having any luck getting that IPMA to load. Just wanted to make sure, do I need to make changes for this line “Short bed No onboard scales / ccd 734-01-04 xx53 4E” Mine is a short bed. No scales or ccd I haven’t contacted forscan yet. Was just hoping to get it figured out on my own...

Ya. Mine even seemed picky in the order that I did them.

Will do. Thank you.

Thanks. I’ll give it a shot

the OBDLink ex

First big change with forscan. I can’t get IPMA to except the write and get “service interrupted”. All the other modules have excepted the changes. The menu even shows the “glare free” option. I also get warning “Normal Cruise Active Adaptive Braking Off”. Any ideas? ‘22 lariat 502a

I watched his YouTube channel where he talked about it a little. Fast forward to the 18:50 mark where he talks about it.

How did you get the side emblems without the f150 and trim level? really like the clean look. Any pics with them installed?