Search results

Yes.. 360 doesnt use cargo camera just back camera. cargo camera is just a seperate virtual button to view the bed.

FYI.. you can activate all the others without the brake light camera. In my google sheet linked above I mention the settings that are specific to cargo camera.

Here. The grey is the truck side. Black is camera/light

Sadly I think they sell it as one unit with the camera. I reember looking at the part number on the harness and it seemed to match the camera. ( I could be wrong). I can take a picture of it tonight

Anyone have any forscan guidance on enableing the 4 front (or 6 front) parking sensors. I did 6 front with the plan of adding the two more for the back to make it Active Park Assit ready(I have a ipma out of platnuim. But step #1 for me would be get the front 4 working in basic way...

You might want to check wiring at IPMA. My 302A was prewired from bumper to a connector in passenger kickplate but not from there to IPMA. Excuse the chicken scratch but the orange ones are for radar cruise. If my notes are right the correct orinitation is connector facing you and pin 11 should...

Anyone have any info on what settings to chanage to enable parking sensors and add full park assist? So far I added 6 front sensors to my 302A XLT and I have two more for the back which should get me park assist compatilbe (I have a IPMA out of a 2021 platnium that had those features).

Do you know what hardware you need from this? I got a IPMA out of a platnuim with all the bells and whistles and added it to my XLT. Do I need a special trailer module or is the higher level IPMA enough? My main goal when buyign the IPMA was 360 cameras and parking assist (I did add 6 parking...

For anyone looking for some forscan guidance. See attached. I diffed out my 302A vs another 302A with cameras. Figuring out what diffs are needed is a bit tricky as most 302As with cameras require trailer assist and you get front parking sensors thown in. There really isn ta 302A with just...

I am fully running today. Thanks to @Tlusk7 on that small jumper C316/C1591 jumper for front camera) part number. That was a life saver for me. For others who may attempt. Front camera is pre wired to the fender connector pair C316/C1591. I had trouble opening it and almost damaged my rear...

The cargo camera is like that but the other cameras are all just coax. But considering you can get digital high speed internet over COAX I guess it is possible.

Note to self, make sure I check my text to speech before posting...

Thanks, I'm sure there's other ways I could back up the ass bill but I figured letting it sink up would be a nice way to have the official as built file that you can use in the as built explorer

I made some changes to add 360 camera and radar cruise. I was hoping to re-download the changes from the motorcraft website as a new as built before making new changes. Does the truck re-sync back to the mothership often?

If anyone is looking for a camera I do have one that I decide to not install. $300 seems to be the going prie on EBAY. I have the short harness/cable that goes with it.

ML3Z-10E929-DBA is the cable you need to go from there to the connnector in the door jamb. The connector from IPMA then then meets at the door jamb

@Tlusk7 is correct.. you cant bypass that 1591/316 connector with that long CCA cable. The CCA cable has a male end and so does IPMA. It leaves you at the wrong gender at IMPA. You can tell with the zoomed in camera shot but not easy to tell with naked eye(at least for my naked eye). Good...

Yes I bought - ML3Z-10E929-CDB to make up the short jumper to go to camera. But I ran from there right to IPMA. I will shoot you a message about how to find full part numbers. I will have to check those connectors but the connector at the end of CAA looked the same as the other ones that were...

@Tlusk7 - thanks for following up. Yeah I think I made things more difficult by removing the blue peice. I think doing that broke or at least disabled the way to unlock the pins. I then searched and searched and found the instruction manual (for that connector type) which when I tried to...

You can add front parking sensors. You need to add mirror cameras too to add front