Sponsored

Recent content by RcFlyer330

  1. CEL for misfire- stored code?

    Did you scan for codes? Nobody can help without codes and even better would be freeze frame data for the codes. It could be caused by almost anything.
  2. Any update on solution availability for the low-pressure fuel pump recall?

    I dont have the max tow axle but i know max tow axle fix has been out since may or so. You should have been notified so are you just waiting on parts then?
  3. Any update on solution availability for the low-pressure fuel pump recall?

    Not what you want to hear but No, there is no updates or fixes yet. So that means ford is still devolping a fix. Its obviously not a huge issue because if it was we would already have a fix. Plus i have not seen one report on this fourm about a failed fuel pump as of yet.
  4. Battery under warranty?

    There has been many people that have warrentied their battery. You will have to take it to the dealer to do so and they will test the battery and either approve it or not. But most people just replace the battery with another brand. One to not deal with the dealer and two the motorcraft...
  5. Mirror calibration?

    Do you have 360 cameras? It dosent look like you do. so I dont see why it would need any calibration.
  6. Truck wouldn't start after car wash

    I doubt its the 12v batteries. Seems like the 21-23 had battery issues but its still possible on 24 and up. As for the messages you got, one said full accessory power mode did you get any other popup messages? Reason I ask is the red battery symbol and orange engine lights normally come on in...
  7. Hdpp rotors and brake pads

    DISCLAIMER: I do not have the hdpp and the part numbers came from ford online parts and rock auto. They may not be the correct part numbers. Your best bet would be to call your local ford parts department to get the correct part numbers but hopefully this helps. Rear rotors for the hdpp are...
  8. NOCO Genius 10x1 Battery Charger Confusion

    Non powerboost will fit an h8 no problems according to the many battery threads on this forum. No errors then let it charge without checking anything. There is a possibility that by you checking the the charger, and waking up the truck, it could reset the charger back to its starting point...
  9. NOCO Genius 10x1 Battery Charger Confusion

    You did set the charger to the agm setting and there are no errors? The errors are listed in the manual. As for if the battery could be bad yes it's possible. I would start by getting it tested with both the electronic style and load tester. Most autopart stores will do this for free. If your...
  10. TPMS system malfunction - cannot be programmed

    First have you scanned the vehicle for codes? If any sensor fails you should still have the others displayed. The vehicle should just display check tire pressure or something similar. I dont think its a sensor problem. This is where you need a professional tpms tool or at a minumun an obd2...
  11. Excessively Loud Popping Noise B&O Unleashed.

    Well I had the boom static issue on startup happen today on my '22. It was loud enough to make me think the moonroof shattered but wasn't eardrum busting. Worst part is i couldn't find this thread fast enough to find what fuse to pull so it stopped by it's self but i still pulled fuse 23 for the...
  12. ECU module programming guide using FDRS

    If you go to the mongoose website the bluetooth option is also wired and included. but you are going to pay about $90 more for the bluetooth one over the wired only one. https://opusivs.com/j2534/mongoose/?srsltid=AfmBOoqt9tMAV_x3ChNoqRL-dgNIJB8BM9VlnDb4e8MBkzT2vNJGFlVW
  13. Rust/corrosion on spark plug threads

    With copper antiseize never use it on aluminum heads. Most spark plug manufactures recommend not to use anything on the threads. The only time i have used aluminum/nickle antiseize on spark plugs is in a seadoo where brp/rotax recommends it. The threads on the plugs above do not look rusted or...
  14. Start&stop

    No, there is not a way to shut it off. its always on.
  15. Factory-Manuals.com product review

    It's in the first post it says it's pdf download from factory manuals. If you go to factory manuals it will tell you how it's delivered it's located at the bottom of the page under help and support how to download. Simplified instructions straight from factory manuals you log into your account...




Top