Recent content by Biorante

Hello! So we found a solution with our local mechanic. It is so obvious that I feel stupid AF 🤡 Calibration was not possible because the car has 2" lifters on the front. So no matter how many sensors I would buy, it would never work because... the computer never saw the "0" position due to the...

😢 Will investigate it further. I don't have FDRS but was thinking about getting cable (moongoose?).

I just got my new front leveling sensor, and unfortunately, it did not fix the problem. I am still unable to calibrate the sensor, but I got some new DTCs. I checked the Voltage, and everything seems to be fine. I am out of ideas. HCM Module Self-Test (OK) [13:49:43.185] On Demand Self-Test...

Glad that this thread is helpful for EU folks!

I see plenty of them in EU. Check DM.

Can you drop me the PN of the TCU you got mounted?

Yes, thank you.

@SilverPigeon could you drop me a photo of your sensor? I connected the old one today, and the same DTCs occurred. It's weird because it showed the one DTC from HCM about calibration, and now it goes wild. Maybe the whole module is f*cked.

No worries. It got me the first time, too. Just went to take photos. no sensor on the right side! Left front: Right front: Both lamps are working well. The only thing that I also reported yesterday, that when I was using HCM monitoring in FORScan, the Swivel values were changing only when...

I didn't see a sensor on the right side. Should it be there?

I am more than sure that some of these DTCs are occurring just because calibration is missing. I tried two days in a row, and I have no idea what I need to do or how long I need to have the engine turned on to get rid of "Sensor Left: Voltage High!". This just aborts the HCM calibration.

They don't :<

Hello, I had a problem with the left side height level sensor, which returned a DTC with a wrong signal, and the local dealership confirmed that it was broken as re-calibration was solving the issue until the car went/off. I bought this sensor: https://www.ebay.com/itm/375283775526 Replaced...

I found some instructions for ACM to change via Forscan. Will check it tmrw.

Yea, but it's different in Poland and other countries in Europe. And lot of FM stations have noise due to that :(