8/2 Build Week

[LeadFoot21]

Every day I wake up and grab my phone off the nightstand....It's the first thing I check....I have to run payroll today and that's my least favorite thing to do. I was hoping for a ray of light in my day......NO CHANGE

Hang in there. None of these trackers are 100% . My blend day was 8/4 and built 8/6. Eta is 9/19 , but palsapp shows its in route to my dealer, so who to believe. We might be surprised and our trucks will get here 2 weeks earlier than the ETA......Hopefully.

Sponsored

 

[Fkn_fafa]

Hang in there. None of these trackers are 100% . My blend day was 8/4 and built 8/6. Eta is 9/19 , but palsapp shows its in route to my dealer, so who to believe. We might be surprised and our trucks will get here 2 weeks earlier than the ETA......Hopefully.

Do you know if JCT picks up the trucks at the end of the rail as well? Wondering if I will get another transport line on palsapp once it goes from rail to truck here in Florida.

 

[LeadFoot21]

Do you know if JCT picks up the trucks at the end of the rail as well? Wondering if I will get another transport line on palsapp once it goes from rail to truck here in Florida.

Not exactly sure where JCT drives, but I heard they deliver the vehicles that we get at my dealer when they're dropped off at the rail yards near Chicago, and also when shipped by truck. Im about 20 miles north of Chicago. I don't believe they really deliver in the western US, just eastern US. Won't hurt to keep checking palsapp to see.

 

[ib_jigged]

Every day I wake up and grab my phone off the nightstand....It's the first thing I check....I have to run payroll today and that's my least favorite thing to do. I was hoping for a ray of light in my day......NO CHANGE

At least yours is in production! I would take that over 3 months of sitting at order confirmed!

 

[Dresdie]

Right there with ya, CBaka.

 

[someday]

New here and joined because I'm an 8/2 build week in limbo too. Been following @Cbaka27 story because his option list matches mine in large part, though I ordered an XLT

8/5 blend date, 8/5 in production, still "In production"

Supercrew 5 1/2", XLT 302A Chrome, Powerboost, Antimatter Blue. 360 cameras, Co-pilot 360 Assist 2.0, trailer tow (not max), FX4, 7.2KW Propower, tailgate step, sliding rear window, 40/console/40, work surface, folding lockable storage, B&O (not unleashed)

 

[xtreme powder coating]

I get it, there’s probably is a lot logistics, but how do you explain;
1) people getting there trucks before others
2) pushed out number 6 = 6 months when this build date comes around
3) people start to order in June getting there trucks
4) etc. etc. etc.

I was okay, until yesterday when I found out that I was pushed out again ;

2021 F150 LARIAT ORDER HISTORY

Ordered Truck on 3/1/21

• Got VIN# on 3/11/21

PIONEER74

• 1st Schedule to Week of April 12, 2021
• 2nd Schedule to Day May 15, 2021
• 3rd Schedule to Week June 14, 2021

Chat on https://performanceparts.ford.com/contact-us/

• 4th Schedule Production Week July 12, 2021
• Called Chat on 6/18/21; asked for a build day, response back: In Order Processing Scheduled to Day (2021-07-13)

AntimatterBlueTremor July 2, 2021

• 5th Scheduled to Day (2021-08-05)

Because of KCAP 2week shut down in July

Contact - Ford Performance Parts


Chat on https://performanceparts.ford.com/contact-us/

• 6th Scheduled to Week (Week of Aug-30-2021 )

This push is uncalled for, no reason behind it. This build date puts the truck order at 6 months now.

i ordered on 2-20-21 no truck yet had build date 4-26 then change and change

 

[BlackKnight21]

Are those the days that you pulled up your window sticker? Maybe the date that you pull up the window sticker?

 

[DuckDuckGreyDuck]

New here and joined because I'm an 8/2 build week in limbo too. Been following @Cbaka27 story because his option list matches mine in large part, though I ordered an XLT

8/5 blend date, 8/5 in production, still "In production"

Supercrew 5 1/2", XLT 302A Chrome, Powerboost, Antimatter Blue. 360 cameras, Co-pilot 360 Assist 2.0, trailer tow (not max), FX4, 7.2KW Propower, tailgate step, sliding rear window, 40/console/40, work surface, folding lockable storage, B&O (not unleashed)

Here following CBaka as well as I am an 8-2 built week with an 8/4 production date. He may officially be an influencer now. I have the same production date as he does, but am being built in Kansas. I wake up every day and the first thing I do is check for any updates. Waiting for the magical day it shows an update. Here are my details:

odered 5/24
VIN 6/7
Sticker 7/28
Blend date 8/2
In Production 8/4
ETA 9/14

Leadfoot XLT 302A, 2WD, 5.0, max tow, 157”WB, tow mirrors, wheel well liners. 360 cams, co pilot assist 2.0, work surface.

 

[johnbisme]

I'm going to offer a bit of an upbeat post today, sounds like several of us could use it in light of Order Trackers being less-than-helpful...

My truck is one of the several here (like CBaka and others) whose order shifted to 'in production' and got an ETA, but hasn't moved in the almost two weeks since. I got my production date and ETA on 8/5, and since then, no changes on any of the trackers or Palsapp.

I spoke with my dealer today for the first time in a couple of weeks, and he said their side is showing my truck as fully produced (i.e. no parts hold) and is awaiting shipment, and they've been told to expect it sometime this week (my ETA is Saturday, 8/21).

So maybe others that are in the same boat as me can take heart that if this is true, we're just dealing with a situation where the trackers are just displaying partial/old/inaccurate information and the actual Official Process is going along just fine behind-the-scenes.

I could be wrong, my dealer could just be trying to reassure me, but for now, I'm going to hope he's right and that all of us in 'mini limbo' since the week of 8/2 will be getting good news soon.

Because I'm relatively close to the factory, I know I'm one of the earliest ETAs from our week out there, so I'll keep reporting my experience as a 'test case' for those of you with ETAs that are still a couple of weeks out.

 

[Dresdie]

I'm going to offer a bit of an upbeat post today, sounds like several of us could use it in light of Order Trackers being less-than-helpful...

My truck is one of the several here (like CBaka and others) whose order shifted to 'in production' and got an ETA, but hasn't moved in the almost two weeks since. I got my production date and ETA on 8/5, and since then, no changes on any of the trackers or Palsapp.

I spoke with my dealer today for the first time in a couple of weeks, and he said their side is showing my truck as fully produced (i.e. no parts hold) and is awaiting shipment, and they've been told to expect it sometime this week (my ETA is Saturday, 8/21).

So maybe others that are in the same boat as me can take heart that if this is true, we're just dealing with a situation where the trackers are just displaying partial/old/inaccurate information and the actual Official Process is going along just fine behind-the-scenes.

I could be wrong, my dealer could just be trying to reassure me, but for now, I'm going to hope he's right and that all of us in 'mini limbo' since the week of 8/2 will be getting good news soon.

Because I'm relatively close to the factory, I know I'm one of the earliest ETAs from our week out there, so I'll keep reporting my experience as a 'test case' for those of you with ETAs that are still a couple of weeks out.

Some positive indication of movement today:

1) Dealer gave me an update saying it was actually going thru production today (even though ford status site shows 7/29 on production status)

2) My FordPass activation was declined at the truck today - indicating someone was in the truck.

Note: blend date 7/29. ETA remains 8/23.

Things are happening. Good luck to you all.

 

[Hellphire]

Some positive indication of movement today:

1) Dealer gave me an update saying it was actually going thru production today (even though ford status site shows 7/29 on production status)

2) My FordPass activation was declined at the truck today - indicating someone was in the truck.

Note: blend date 7/29. ETA remains 8/23.

Things are happening. Good luck to you all.

My FordPass must be the only one that errors itself out after couple minutes then reverts back to an activate button. It’s giving me anxiety that it’s not going to work when I get my truck. Anyway it’s awesome your seeing movement. I’m still holding out hope that I have mine before Labor Day. Although that is probably not feasible at this time.

 

[Cbaka27]

Here following CBaka as well as I am an 8-2 built week with an 8/4 production date. He may officially be an influencer now. I have the same production date as he does, but am being built in Kansas. I wake up every day and the first thing I do is check for any updates. Waiting for the magical day it shows an update. Here are my details:

odered 5/24
VIN 6/7
Sticker 7/28
Blend date 8/2
In Production 8/4
ETA 9/14

Leadfoot XLT 302A, 2WD, 5.0, max tow, 157”WB, tow mirrors, wheel well liners. 360 cams, co pilot assist 2.0, work surface.

Hey guys welcome back to my channel!!!! Smash that like button and subscribe. I just checked all the trackers and I got nothing tonight. I promise that it will be the first thing I do in the morning!!!!

 

[someday]

I'm going to offer a bit of an upbeat post today, sounds like several of us could use it in light of Order Trackers being less-than-helpful...

I didn't mention that I have a 9/3 estimated delivery. I've been holding out hope for that date to hold, but FP wasn't very encouraging the other day when I talked to them. But maybe...

Thanks for the good thoughts

 

[Cbaka27]

I didn't mention that I have a 9/3 estimated delivery. I've been holding out hope for that date to hold, but FP wasn't very encouraging the other day when I talked to them. But maybe...

Thanks for the good thoughts

I have seen from other people that unless Ford pushes those dates out they normally hit them.

Sponsored