What did you do TO your F-150 today? 🙋🏻‍♂️

[ThumperF150]

Installed 4.11 gears, a Torsen LSD in the front and new diff covers with actual drains.

Sponsored

 

[KartRacer25]

Ordered 17" Icon alloys wheels online from DT. On sale $195 each, (vs 300) through Discount tires price matching, used my DT credit card. good deal. saved $400 +- on wheels that should actually fit.
Alpha 17" wheels in titanium with black rings, to replace my 20" for more sidewall for aired down offroad capabilities. Bent, repaired and replaced enough of my original 20s over 3 years.
Icons: 17x8.5, 87.1 mm center bore, 6mm offset, 6x135mm bolt patten. pat num: 1217856350TT
No centering rings required, no spacers required. Should be flush, maybe a little poke. We shall see. From +44 to +6 so delta -38mm or 1.5 inches.
Thank you Icon and Discount tire !!
Plan on 35x11.5 RGs but 35x12.5 might fit. Looking at KO3s too...but 2026 release.
Yes will post pics, once I can afford new tires. LOL
https://www.iconvehicledynamics.com/wheel/8487/icon-alloys-alpha/?finishID=1358

 

[ThumperF150]

Ordered 17" Icon alloys wheels online from DT. On sale $195 each, (vs 300) through Discount tires price matching, used my DT credit card. good deal. saved $400 +- on wheels that should actually fit.
Alpha 17" wheels in titanium with black rings, to replace my 20" for more sidewall for aired down offroad capabilities. Bent, repaired and replaced enough of my original 20s over 3 years.
Icons: 7x8.5, 87.1 mm center bore, 6mm offset, 6x135mm bolt patten. pat num: 1217856350TT
No centering rings required, no spacers required. Should be flush, maybe a little poke. We shall see. From +44 to +6 so delta -38mm or 1.5 inches.
Thank you Icon and Discount tire !!
https://www.iconvehicledynamics.com/wheel/8487/icon-alloys-alpha/?finishID=1358

Those look good and that’s a great deal. Please post photos once you have them all mounted up.

 

[thebluegoat]

Installed 4.11 gears, a Torsen LSD in the front and new diff covers with actual drains.

Do you have any links for the covers?

 

[z-man]

Do you have any links for the covers?

Rear one looks like the Spicer.

Amazon.com: Spicer 10023539 Differential Cover (Ford 9.75), 1 Pack : Automotive

 

[ThumperF150]

Do you have any links for the covers?

The rear is in fact the Dana Spicer which is the same as the Ford Performance only cheaper.

The front is a stock Ford cover that I had a drain plug welded into. Was a total PITA because the plug is stainless steel and the cover is not. They heat at different rates so it’s tuff to not get a leak.

I have since learned the front diff cover on Raptors bolts right onto a basic F-150 and comes with a drain. But it’s almost $300.

 

[Escape Hatch]

Ordered 17" Icon alloys wheels online from DT. On sale $195 each, (vs 300) through Discount tires price matching, used my DT credit card. good deal. saved $400 +- on wheels that should actually fit.
Alpha 17" wheels in titanium with black rings, to replace my 20" for more sidewall for aired down offroad capabilities. Bent, repaired and replaced enough of my original 20s over 3 years.
Icons: 17x8.5, 87.1 mm center bore, 6mm offset, 6x135mm bolt patten. pat num: 1217856350TT
No centering rings required, no spacers required. Should be flush, maybe a little poke. We shall see. From +44 to +6 so delta -38mm or 1.5 inches.
Thank you Icon and Discount tire !!
Plan on 35x11.5 RGs but 35x12.5 might fit. Looking at KO3s too...but 2026 release.
Yes will post pics, once I can afford new tires. LOL
https://www.iconvehicledynamics.com/wheel/8487/icon-alloys-alpha/?finishID=1358

I anticipate poke. I run a 18x9 +6 wheel on Icon S3 suspension with 295/70 AT4W that measure 34.3x12.2 and have poke. See photo below for reference.

 

[lrb_35128]

I have since learned the front diff cover on Raptors bolts right onto a basic F-150 and comes with a drain. But it’s almost $300.

Wouldn't happen to have the part number, would ya?

 

[ThumperF150]

Wouldn't happen to have the part number, would ya?

No Sir.

 

[lrb_35128]

No Sir.

No worries. - When it's time, I'll put my Google-Fu to work, provided one of out other members haven't already found and posted it.

Cheers!

 

[Big Dog Daddy]

No worries. - When it's time, I'll put my Google-Fu to work, provided one of out other members haven't already found and posted it.

Cheers!

Check here.

https://www.f150gen14.com/forum/threads/front-diff-build.31869/

 

[lrb_35128]

Check here.

https://www.f150gen14.com/forum/threads/front-diff-build.31869/

~$200 here: https://ford.oempartsonline.com/oem-parts/ford-cover-nl3z4033a

 

[Area51_5.0]

https://www.texas-speed.com/p-24825-tsp-21-24-ford-f150-50-valved-catback-exhaust.aspx

I ordered this a couple days ago. I'm an avid hunter so I need the exhaust to be quiet entering and exiting the land. I currently have a p/n 12249 magnaflow which I love but I can't control the sound.

Put it on today. Still need to figure out where to tap on for vacuum. No vacuum lines under the hood that I can see will work.

 

[majorbanjo]

Ranch Hand....

 

[Lricaud81]

I bought $20 worth of ice blue LEDs and put them in both spots of all 4 doors and under the front seats for the rear, wired into the factory harness

I was already provisioned for front ambient and cup holder so running those wires was quick work. Doors are on the dimmer circuit which is located in the window control harness rear, door lock controls front, and the front ambient/cup holder are controlled from the screen with all wires in factory locations.

Slots in the door pockets allow you to place a 9 count strip over it to illuminate the pockets.

For the handles I just placed a 3 strip (cut in increments of 3 LEDs) in there.

Where'd you get led's. Happen to have a link

Sponsored