What did you do TO your F-150 today? 🙋🏻‍♂️

[SpaceWhiteF150]

Round 3 is opening!!

If your interested shoot me a PM!
Bracket allows you to mount pod lights and light bars! It is a .25” piece of steel powder coated and shipped to your door!! Fits 21-24, remember you can always use code cometcruiser at checkout for diode dynamics!

Sponsored

 

[Waterfowler41]

Knocked out a quick pedal upgrade in the truck this afternoon.

 

[SpaceWhiteF150]

Another clean install! This one’s rocking rigid pods!

 

[Radiganp]

Installed my Sounds Good Stereo front door block off plates. I ordered the front only to see if they were worth the money and I’d say for sure they are! I’m no audiophile by any means but they really seemed to tighten up the sound. For the cost I’d say 100% worth it. I will order up the rears soon! Install was simple and would have been easier had I figured out how to remove the door latch connector before I was 85% done.

Also took delivery of my wheels, at least 3 of the 4. The last will be here next week and get installed! Went 22x9.5 +20. My KR had 22’s already so figured no need to replace tires. Really excited about these going on!

 

[24STX5.0]

I've now owned mine for a month. Most mods so far have been the basics (total cost shipped, installed by me except the bedliner):

Patriot spay-in bedliner: $480
Bedrug XLT: $218.45
BakFlip MX4 tonneau: $1,139.99
Ford tailgate damper: $83.70
Ford Boxlink plates: $56.00
Ford Boxlink cleats: $69.40
Ford rear wheel well liners: $178.95
Borla S catback: $766.99
Ford Aeroskin II deflector: $89.10
Ford/TufSkinz tailgate letters $71.65
Ford stoneguard delete caps: $23.10

 

[JustinH]

Got mine all cleaned up and installed the Ford Performance Black Painted Grill.

 

[Zedbra]

Finished mounting my kickback mudflaps. I had to trim the fronts to prevent tire rub but they were easy to mount and should significantly cut down on mud getting flung all up the sides when I go hunting. I used 14" flaps on the rear and 12" flaps on the front; bought them from a local fabricator that works out of his garage - Wild West Custom Fabrication.

 

[wolfman1]

Installed a Fitcam dash cam kit in my truck this morning. Had this morning my Rebel and loved how easy it was to install, to use, and the quality of footage is awesome for the price.

Here’s my install and if you skip to the end you can see some sample footage for the front and rear cams.

I installed this back in December but had to return it because the harness that came with did not connect properly to the OEM plug that connects to the mirror. Based on your video, it seems like you didn't have that issue.

 

[Buyer2021]

I installed this back in December but had to return it because the harness that came with did not connect properly to the OEM plug that connects to the mirror. Based on your video, it seems like you didn't have that issue.

Exact same experience here, ordered through Amazon. Like the looks of the cam but have been hesitant to re-order / try again.

 

[Waterfowler41]

I installed this back in December but had to return it because the harness that came with did not connect properly to the OEM plug that connects to the mirror. Based on your video, it seems like you didn't have that issue.

I had to finesse the plug to connect but with a bit of patience it it fit together fine.

 

[9663mu]

Another clean install! This one’s rocking rigid pods!

Very sweet tremor you got bro. I also saw it on SVtP. Can I please ask to measure the front and back ground to top of fender when you get a chance ?

 

[GypsyDanger]

I pulled the rear blocks and did a quick chrome delete of the running boards. I’m going to redo them at some point as I’m not super happy but they are better than the chrome! Now I just need to black out my side vents and front end. New wheels will be on the way soon as well then should be about complete on the exterior.

damn that stance is pretty nice with the blocks pulled.....now you got me thinking....

 

[SpaceWhiteF150]

Very sweet tremor you got bro. I also saw it on SVtP. Can I please ask to measure the front and back ground to top of fender when you get a chance ?

Thanks man it was a customers truck not my personal truck. Sorry man!

 

[Radiganp]

damn that stance is pretty nice with the blocks pulled.....now you got me thinking....

Thank you! Not bad for free and 15 minutes.

 

[GypsyDanger]

Thank you! Not bad for free and 15 minutes.

Fore sure, i did it on my 19' and now i may just do it on the 22'

Sponsored