What did you do TO your F-150 today? 🙋🏻‍♂️

[SWFLGuy]

Here she is. Eibach 2.0 pro truck coil overs and resi shocks, fuel 20x9 +1 wheels wrapped in 295 60 20 Toyo at3 tires and a 2” block in the rear.

Sponsored

 

[Blackout150]

Here she is. Eibach 2.0 pro truck coil overs and resi shocks, fuel 20x9 +1 wheels wrapped in 295 60 20 Toyo at3 tires and a 2” block in the rear.
View attachment 69527

Jesus. That thing is a monster! Great looking truck

 

[SWFLGuy]

Thanks! It turned out exactly as I hoped it would

 

[Techguy82]

RCI skids on my Tremor with added cat guards. Bought them used, but didn't install the front skid for obvious reasons. The Tremor has decent coverage for front, oil pan and transfer case, but still uses the stupid fiber cover for the transmission.

 

[780]

I store my jumper cables, tow strap, umbrella, and snow brush behind my passenger side rear seat. I plan on putting a moving blanket, ratchet straps, safety vest, and tarp behind the driver's side seat.

There's that much room back there?

 

[wrgrimes]

I am impressed with some serious modifications to already expensive trucks.
As an old man, I am pretty simple!
2023 King Ranch standard; PowerBoost; 4x2; 5.5; 7.2Kw; Max tow; 360 Assist/camera. White/2 tone
Added:
Stubby antenna
WeatherTech mats
BedRug- floor and tailgate
BoxLink with cleats
RetraxPro MX
I feel very mundane in this crowd.

 

[Nomis]

Here she is. I have wheels coming still. I think I needed to wipe my camera lens it is kinda foggy looking.

Special thanks to @Matt_Bonilla08 for answering my questions about the Eibach kit.

On the list.

-Eibach Pro Truck 2.0 level

- BF All Terrain KO2 33x12.5x18 on factory wheels. These were VERY close to the UCAs. As soon as I got there, I stuck my finger back between and it was less than a 1/4 inch clearance. I pointed it out to the dealership who never seemed to check that. They ground down the non structural casting on my UCAs a bit to give it a bit more clearance because they couldn't guarantee it wouldn't rub offroad.. They chose that size for me since what I wanted wasn't available. So they are gonna give me a deal on wheels. I'll be getting the Icon kit soon anyway and different wheels with +20 instead of factory +44.

-Bak X4S, this is a really nice tonneau cover.

-Spigen screen protector for the screen inside. Very nice, easy to install, matte finish and not a finger print magnet like the screen itself. Here's a link because I really like their products. I use their phone cases and screen protectors as well. https://www.amazon.ca/dp/B09HSQWW22?psc=1&ref=ppx_yo2ov_dt_b_product_details

-3M all over the place and tinted the front windows

-Line-X and bed seal

-Stubby antenna

-Some kickback mud flaps. They will be giving me new ones when I get the different offset wheels because they will have to come out a bit.

- Put in the pedal commander this morning, it works well and is worth the money if you don't want to void warranty with a tune right away IMO. Sport+ is too much especially in the winter. Can't even keep the truck straight.

-Wheels I'm getting are either the XD Technic or Fuel Blitz.

-MBRP Sport exhaust is ordered as well, I'll run it without the resonator

-Think I'll order the 1" block and U bolts from Eibach for the rear to get a little rake back for when I haul stuff.

-I was gonna get CAI but you can hear the factory air box sucking already when you get on it. I don't think it's even necessary. Sounds like it gets plenty of air already. What I would like is some sort of performance intake manifold. I've read they can add a decent amount but nothing really available for 14 Gen. This is a daily driver so a super charger is a bit much.

The Eibachs feel nice. I took it down some dicey mountain roads and climbed very off camber and rutted hills already. It all feels really nice. Washboard seems pretty jittery but the roads are slippery and my bed is empty. Like everyone else has said, it is firmer than stock. Less body roll and floaty feeling is gone.

-

 

[TexasTruck]

Installed a USB A and C adapter in the factory covered location down deep in the cavernous center console. Since I had 1/2 the dash and the center console apart, I installed a Boost Auto Parts wireless charging pad in the forward cubby area in the center console. I changed up their wiring though. The instructions say to splice into the "blue light" surrounding the factory USB hub in the cubby, but man that is small gauge wire. Their wiring harness includes a 18 gauge wiring 12V power point (aka cigarette lighter) inline male and female connectors, nice. I decided to connect it to the 12V power point in the dash. That is 18 gauge wire like their harness and the USB adapter, cool. Any way, turned out great. One thing I wasn't aware of is the 12V power points stay on for some default period of time after the truck is turned off. I can program FORScan to disable it I suppose, but it seems to be about 90 minutes before turning off.

DAMAVO YM1218 Female USB C & USB A

https://boostautoparts.com/products/21-f150-charger

 

[JeffInCOS]

I am impressed with some serious modifications to already expensive trucks.
As an old man, I am pretty simple!
2023 King Ranch standard; PowerBoost; 4x2; 5.5; 7.2Kw; Max tow; 360 Assist/camera. White/2 tone
Added:
Stubby antenna
WeatherTech mats
BedRug- floor and tailgate
BoxLink with cleats
RetraxPro MX
I feel very mundane in this crowd.

That's the fun part of customization, you get to the place where you like your truck most and stop. I don't even have a truck yet. I have to look at all y'alls trucks for inspiration. And inspired I have been. My Amazon cart is chocked full of the really important safety stuff and mostly trinkets and doodads that will make my truck mine.

 

[wrgrimes]

That's the fun part of customization, you get to the place where you like your truck most and stop. I don't even have a truck yet. I have to look at all y'alls trucks for inspiration. And inspired I have been. My Amazon cart is chocked full of the really important safety stuff and mostly trinkets and doodads that will make my truck mine.

I am also impressed with much skill, knowledge and ingenuity!

 

[Buyer2021]

Wrapped-up final details of this installation this morning:

A bedside 7/12-pin socket to provide super convenient connection of my 5th-wheel RV with the Ford Accessory Trailer TPMS+Rear Cam Kit

Details of the project with more pics at this post in the main trailer TPMS thread

 

[Calson]

Added a Hulkman jump starter and a 2-gauge 20 ft jumper cable to the bin under the rear seat of my truck. I cannot rely on the battery to have enough juice to start the truck and want to be independent of a roadside assist.

I had previously added a fiberglass cap with black curtains and a 48 x 72 x 14 inch metal tool cabinet for the bed, and splash guards at all four wheels.

 

[fluffernutter]

Thanks to reddit user u/CustardTime7957 for the idea in this reddit thread.
I installed an underhood LED light bar.
Took all of 15 minutes with the fuse tap.

 

[sbi]

Thanks to reddit user u/CustardTime7957 for the idea in this reddit thread.
I installed an underhood LED light bar.
Took all of 15 minutes with the fuse tap.

Looks sharp!!
Care to share more details? Which fuse did you use? Is it 1:1 with the DRL or head lights in term of on/off? Where do you buy the LED strip?

 

[Iconic22F150]

Finally finished making my custom hitch cover.

Sponsored