Camera relocation

[Bodie]

I’ve added a camper shell and now the rear camera is blocked. Has anyone moved or relocated the camera to another place?

Sponsored

 

[powerboatr]

i have been asking the same question for over 6 months.. no body ever pipes up
i would think the rear light and camera could be moved to the cap rear area and put a blank plate on the truck.
but the other concern is how the stop light camera would interfere with the 360 camera views or its input?
i would not like to loose the view,
another scenario could be place camera in the front upper inside edge of the cap to see the inside

but i have zero success in getting any answers

 

[Mtnman1]

I’ve added a camper shell and now the rear camera is blocked. Has anyone moved or relocated the camera to another place?

Im trying to picture how a topper blocks the tailgate latch?

Have any pics?

 

[SilverPigeon]

I think he's talking about the CHMSL.

 

[Jesse-Infotainment]

You could replace the thrird brake light up high with a standard non camera one. Then move the camera to where ever you want. Its not a coax camera it is standard wiring. Power, ground video pos/neg and lin bus. It will have no affect on the other cameras.

 

[tcp]

You could replace the thrird brake light up high with a standard non camera one. Then move the camera to where ever you want. Its not a coax camera it is standard wiring. Power, ground video pos/neg and lin bus. It will have no affect on the other cameras.

Amazing! Got part # handy?

 

[tcp]

Found this on ford parts assuming the $748 is the one with the camera but there are 2 other without? Also part number seems to be the same....

 

[Jesse-Infotainment]

I dont know the Part number.. But one is LED and one is incandescent all the ones with the cam are lED

 

[Jesse-Infotainment]

LED No camera
ML3Z13A613B

Diagram for the Connector WITH Camera

I noticed it isnt label.. So I also included the Diagram

Sponsored