Wow, that looks tight! ??Picked mine up at the dealer yesterday after work and with about 8” to spare it even fits in the garage. Will probably add my Bedrug and Bak X4s tomorrow.
| User Name | Destination | Plant | Trim | Ordered | Build Date | Delivery ETA | Shipped | Delivered | Picked Up | Pictures Posted |
|---|---|---|---|---|---|---|---|---|---|---|
| Grizzlee* | TX | DRB | King Ranch | 10/09 | 01/06 | 01/31 | 01/10 | 01/19 | 01/21 |  |
| kb2755 | ON, CA | DRB | XLT | 10/01 | 01/03 | 01/10 | 01/08 | 01/17 | | |
| Satellite67* | TX | DRB | King Ranch | 10/28 | 01/05 | 02/06 | 01/15 | 01/19 | | |
| _____________ | ________ | ___ | ______ | _____ | ___ | _____ | _____ | ______ | ____ | _____ |
| smyph* | IA | DRB | Lariat | 10/14 | 01/03 | 01/30 | 01/10 | |||
| Buhorn | IA | DRB | Lariat | 10/20 | 01/06 | 01/31 | 01/10 | |||
| Nasto* | ID | DRB | Lariat | 10/28 | 01/05 | 01/28 | 01/11 | |||
| mtnbike009* | CO | DRB | XLT | 11/09 | 01/04 | 02/13 | 01/13 | |||
| thomhunt | IA | DRB | Lariat | 11/29 | 01/06 | 02/01 | 01/13 | |||
| Yawyeet | AL | DRB | Lariat | 11/03 | 01/03 | 02/05 | 01/15 | |||
| _____________ | ________ | ___ | ______ | _____ | ___ | _____ | _____ | ______ | ____ | _____ |
| Bud | VA | DRB | Lariat | 11/15 | 01/05 | 01/25 | ||||
| thudnblunder* | IA | DRB | Platinum | 11/16 | 01/08 | 02/08 | ||||
| *Spray-in bed liner, wheel well liner, other add-on accessories |
Backing in is the only way to go!
Didn’t get the Bak X4s on today… The tailgate seal from ESI was simple and quick (use updated online instructions as those in the package are dated). Bedrug is in but took a while taking all the BoxLink, Tie downs, and PowerPro out, cutting holes for screws and putting all back.Picked mine up at the dealer yesterday after work and with about 8” to spare it even fits in the garage. Will probably add my Bedrug and Bak X4s tomorrow.
Happy with the fit for the Bedrug? Even though it was a bit of pain to cut out, was it worthwhile? Debating between this and Line-X. Thx.Didn’t get the Bak X4s on today… The tailgate seal from ESI was simple and quick (use updated online instructions as those in the package are dated). Bedrug is in but took a while taking all the BoxLink, Tie downs, and PowerPro out, cutting holes for screws and putting all back.
We're in the same boat, or rail car, or whatever! Union Pacific railed it to Salk Lake City last week. Supposed to be on a carrier to Idaho and delivered to dealer this week. Good luck! ?
Yes, very happy so far. Love the fact it’s easy on the knees, wood and furniture, and my dog. There are a few fit issues with the uprights in the bed and did not use the stamped cutouts on the back of the Bedrug. Removed all BoxLink and tie downs, then put the screws barely back in. Once at that area I used a razor blade to cut on top of screw poke it through, then take it out and mount tiedown and BoxLink on the surface. Does not work for PowerPro because did not want try and figure out if could remove cable. Same with lights, just feel and cut. Did leave enough around PowerPro to tuck edges under the PowerPro - except on left where I missed my cut. (Be careful removing PowerPro as there are pins on the bottom and left edge)
Congrats!!Picked mine up at the dealer yesterday after work and with about 8” to spare it even fits in the garage. Will probably add my Bedrug and Bak X4s tomorrow.
I found this video pretty well done also - he used the same method as you did for the Boxlink and tie-downs.
Granger says my truck was built on 1/8 and to expect delivery 2-8 Feb but Ford tracker still shows it under production.
He shoots....he scores! Congrats!She’s home! Dark now, I can provide more pictures later
