phyber
Active member
- Thread starter
- #1
I have a '21 XLT PB, and am looking to install a small powered sub in the rear.
I have seen write ups on older (~2018) F150's where there is a white WPT1212 connector behind the driver-rear panel, and people are able to use an adapter on that connector to provide power/input for an amplifier. When I pull back the weatherstrip I do not see an obvious white connector as YouTube videos show.
Is there another connector/location I should be looking for? Was there a model change in '21 that moved it? Will I have to wire an amp the "old fashioned way" with a power cable through the firewall and a "turn on" wire? I really was excited to use factory wiring and connectors to do this...
I have seen write ups on older (~2018) F150's where there is a white WPT1212 connector behind the driver-rear panel, and people are able to use an adapter on that connector to provide power/input for an amplifier. When I pull back the weatherstrip I do not see an obvious white connector as YouTube videos show.
Is there another connector/location I should be looking for? Was there a model change in '21 that moved it? Will I have to wire an amp the "old fashioned way" with a power cable through the firewall and a "turn on" wire? I really was excited to use factory wiring and connectors to do this...
Sponsored
