jrbrock67
Member
- First Name
- Rick
- Joined
- Oct 27, 2025
- Threads
- 2
- Messages
- 6
- Reaction score
- 1
- Location
- Damascus Oregon
- Vehicles
- 2025 F150 XL Roush Nitemare
- Thread starter
- #1
Hello,
Has anyone performed installing oem ford tremor rear bumper assembly and twin tip exhaust system on XL or XLT models? Currently, my exhaust dumps out behind passenger rear wheel. And bumper does not have the cut outs in the bumper for the exhaust tips.
The plan is to remove XL rear bumper assembly and the exhaust assembly from muffler back and replace with oem ford tremor bumper assembly and exhaust assembly. The only area I see issue is driver side where the exhaust comes around the axle and there seem to be a lot of brake/fuel/breather lines. I believe the tremor and raptor both have a different mount assembly for these lines to allow the exhaust to come around.
Hopefully, someone has performed this upgrade and can share some knowledge.
Thanks,
RickB
Has anyone performed installing oem ford tremor rear bumper assembly and twin tip exhaust system on XL or XLT models? Currently, my exhaust dumps out behind passenger rear wheel. And bumper does not have the cut outs in the bumper for the exhaust tips.
The plan is to remove XL rear bumper assembly and the exhaust assembly from muffler back and replace with oem ford tremor bumper assembly and exhaust assembly. The only area I see issue is driver side where the exhaust comes around the axle and there seem to be a lot of brake/fuel/breather lines. I believe the tremor and raptor both have a different mount assembly for these lines to allow the exhaust to come around.
Hopefully, someone has performed this upgrade and can share some knowledge.
Thanks,
RickB
Sponsored
