Sold: New Mexico [SOLD] ICON 2.5 CDCV Coil Overs and Shocks

[dspa]

ALL ITEMS SOLD AS OF NOV 18, 2024

I have sold my F-150. Now to sell off the addons I took off before sale. All asking prices are BEFORE shipping. These are all large/heavy items, so I'd prefer not to ship them. However, if you decide you want these shipped to you, I can get you a quote.

ICON CDCV Coil Overs and Rear Shocks (approximately 2000 miles on them, street only)
Icon part numbers: Front Coil Overs: 91823C, Rear Shocks: 97721CP
These are in good working order with no leaks and have about 2000 miles on them. The boots on the rear shocks are from CJC OffRoad and were installed from day one. All units show small marks/signs of being installed/deinstalled. This does not affect their function and cosmetically I'd rate them 9/10. Happy to provide more pictures if requested. I got the set for $3100 "on sale" back in April 2024. I'll let them go for $2100. Included is all mounting hardware, plus some hardware I added to the kit for a more secure installation:
1. Flat washers for the top hat bolts (ICON only includes lock washers).
2. Steel sleeves for the bottom mounting bolts (bolts mount through lower control arm). I was not happy with the slop through the mounting holes with the hardware provided by ICON. I added steel sleeves which fit perfectly and stay in place with a dab of black RTV. I'll include a 5th sleeve to facilitate tapping out the sleeves should you decide to remove them.
3. Lock washers for the front reservoir mounting bolts.

I'm also selling a Diamondback SE Tonneau Cover for a 5.5' bed HERE.

Please PM me with any questions. I'm happy to talk and answer any queries you may have.

Finally -- I have sold several times on the forum and have had no complaints. Reference these threads for my previous sales:
https://www.f150gen14.com/forum/thr...cks-985-24-265-for-2021-f-150-like-new.18403/
https://www.f150gen14.com/forum/thr...5-60r20-m-s-like-new-local-pickup-only.18312/
https://www.f150gen14.com/forum/thr...-of-4-1700-albuquerque-nm-local-pickup.19656/

[SOLD] Steeda 4WD Sway Bar (Like New) [SOLD]
I installed this sway bar spring of 2023 (right after I purchased the F-150). It tightened up the body roll tremendously, however, it did not have the effect on ride quality I was looking for, so I took it off and boxed it back up. Condition is like-new (maybe 200 miles on the bar total). I failed and didn't take a "before" pic prior to wrapping it all up for sale. I assure you all parts are included (including unused lube for the bushings) and that the bar is in excellent condition with no chipped powdercoat. For a serious inquirer, I would be willing to unwrap it all and take another picture or three. This bar sells for $619 new on Steeda's website. I'll let it go for $350.

Sponsored

 

[Natetroknot]

PM'd on the sway bar

 

[DoughRoller]

shipping quote please

 

[dspa]

Swaybar SOLD

If anyone is interested in the ICON kit but thinks I'm asking too much, tell me what you think it's worth. I'll tell you if I agree.

 

[RichieRichD]

PM’d on the ICON suspension

 

[dspa]

BUMP. Still available.

 

[DHBPhoto]

Do you know the spring load? Thinking of switching up my Fox 2.5s, but certainly don’t want to go stiffer.

 

[dspa]

Honestly, I don’t. By my admittedly limited understanding, pre-compressing the springs more, giving a higher front lift/level, will make the truck ride stiffer.

By my seat of the pants, I’d say they were only slightly stiffer than stock, but not overly so. I only had them set at about 0.75” of lift.

Your Fox 2.5 are most likely linear valved, which in theory should provide a slightly softer ride on pavement than my digressively valved Icons.

When I put the stock coil overs back on before trading the truck, it felt floaty after riding on the Icons for a couple thousand miles. I did not in any way find the Icons overly stiff. Ride comfort is very subjective, however. Case in point — I prefer the ride of my new F-350 over the F-150, even though it is significantly firmer. I don’t have the tires on the F-350 up to sticker pressure, though.

 

[dspa]

ALL ITEMS SOLD

Huge shout-outs and thanks to:

DoughRoller
tjarvis22

... both stand up guys and a real pleasure to sell to. I wouldn't hesitate to do business with either of them in the future, and neither should you.

Happy Thanksgiving everyone!

Sponsored