New wheels and suspension questions

[fatcats]

I’m upgrading my suspension with halo lifts 2.5 coilovers and ICON uca’s and am wanting to upgrade the wheels and tires as well since the generals are almost completely worn out.

Does anyone have experience running the ICON uca’s with 18x9 +6mm offset? That’s what ICON’s website recommends but it seems like the wheels and tires would poke out more than I’d like. So I was looking at +20 offset or something with less poke that could still clear the UCA and not rub.

The tires I’m looking at are either Toyo AT3 in 295/75 18 or 285/75 18

This would be the first time I make any mods for any vehicle so all input and pictures appreciated.

Sponsored

 

[mxwrk]

Not 100% sure for your application, but I have billet Camburg UCA's, and they required whatever wheel I chose to have at least a 5.75" backspacing...so I ended up going with a 17x8.5, 0 offset (4.75" backspacing). Slight poke, may change to a 17x8, +25 offset which is still a 5.44" backspace...although thats cutting it close.