Do 0 mm off set wheels with 35" tires rub?

[ThumperF150]

Specifically, I am looking at 17X8.5 wheels with 0 mm off set and 4.75" of back spacing. I want to run my current 35X11.50 tires.

I have these tires mounted on my factory wheels with a 1/2" spacer which puts me at about +30 mm off set. I do not know the back spacing of the factory wheels.

I have 2' of lift.

If you are running this combo please let me know.

Thanks

Sponsored

 

[bigjay805]

Can't provide feedback but would love it if you can post a picture of how they look on your stock wheel. Also, was the spacer needed or did you do it just for looks? Thanks in advance!

 

[ThumperF150]

Spacers were needed to clear the JBA UCAs. There’s a really good chance that my tires would have cleared the factory UCAs.

 

[MO_Bronco]

Depending on actual measurements you'll be really close.

These are 35x10.50 Kenda RTs on a 17x8.5 +0 wheel; tires spec out at 34.76"x11" per Kenda.

My suspension is about 2.25" level and I had to trim the lower valance but everything else clears perfectly with no rubbing at all... really just comes down to true measurements.

 

[IVD6G]

Depending on actual measurements you'll be really close.

These are 35x10.50 Kenda RTs on a 17x8.5 +0 wheel; tires spec out at 34.76"x11" per Kenda.

My suspension is about 2.25" level and I had to trim the lower valance but everything else clears perfectly with no rubbing at all... really just comes down to true measurements.

These tires are fire.

 

[MO_Bronco]

These tires are fire.

no one will ever be able to convince me these aren’t the best tires on the market today, all things considered.

35’s for sub $300ea
Load range D
Aggressive yet quiet and well wearing tires
Great traction in wet/snow
Sub 70lbs per tire

Kenda 35x10.50 on Amazon

 

[IVD6G]

no one will ever be able to convince me these aren’t the best tires on the market today, all things considered.

35’s for sub $300ea
Load range D
Aggressive yet quiet and well wearing tires
Great traction in wet/snow
Sub 70lbs per tire

Kenda 35x10.50 on Amazon

They're the best IMO

 

[ThumperF150]

Depending on actual measurements you'll be really close.

These are 35x10.50 Kenda RTs on a 17x8.5 +0 wheel; tires spec out at 34.76"x11" per Kenda.

My suspension is about 2.25" level and I had to trim the lower valance but everything else clears perfectly with no rubbing at all... really just comes down to true measurements.

Thank you.

This is helpful.

Sponsored