Sponsored

Delete

Dixie

Well-known member
Joined
Mar 10, 2021
Threads
12
Messages
117
Reaction score
93
Location
Canadian Prairies
Vehicles
2025 Ford F-150 Lariat PB
Yep going on 4 months without adaptive cruise, regular cruise, lane centering and all the wonderful safety features. Called the dealer yesterday and my Front camera has been pushed back another two weeks from the last date (5th time).

I mean if I at least had normal cruise I would be a little less frustrated not much but a little...
i agree completely. Even disabling adaptive cruise in the settings doesn’t allow normal cruise to work. I drive 70km per day round trip for work and it’s annoying to say the least. Huge software oversight on Ford’s part
Sponsored

 

PeteRit

Well-known member
First Name
Pete
Joined
Jul 19, 2021
Threads
2
Messages
54
Reaction score
56
Location
21Colorado
Vehicles
21 Lariat PB
Occupation
Retired
Yep going on 4 months without adaptive cruise, regular cruise, lane centering and all the wonderful safety features. Called the dealer yesterday and my Front camera has been pushed back another two weeks from the last date (5th time).

I mean if I at least had normal cruise I would be a little less frustrated not much but a little...
Out of curiosity, stock wheels and tires or level/lift and aftermarket wheels? I ask because I recent seen a thread on the Forscan forums about this same problem and Ford's answer was to take off the lift and return to stock. If it's fine and the IPMA initializes and calibrates then the problem is on the customer. Here's the thread for you to read thru. Interesting one. Ultimately the dude sold the truck because of the headache. I think on the second or third page there's a picture of what the Ford engineers "solution"

https://forscan.org/forum/viewtopic.php?f=16&t=18566&hilit=2021+F150
 
OP
OP

Dadofjax

Well-known member
First Name
DadofJax
Joined
Mar 9, 2021
Threads
19
Messages
291
Reaction score
223
Location
55555
Vehicles
2021 F150 Lariat
Out of curiosity, stock wheels and tires or level/lift and aftermarket wheels? I ask because I recent seen a thread on the Forscan forums about this same problem and Ford's answer was to take off the lift and return to stock. If it's fine and the IPMA initializes and calibrates then the problem is on the customer. Here's the thread for you to read thru. Interesting one. Ultimately the dude sold the truck because of the headache. I think on the second or third page there's a picture of what the Ford engineers "solution"

https://forscan.org/forum/viewtopic.php?f=16&t=18566&hilit=2021+F150
Completely stock. It started at 470 miles I'm now at 8000 and it hasn't been fixed. To start my issue occurred when the truck sat outside in the sun for a few minutes. I would get pre collision/front camera error ding every ten seconds. Since they replace a control module the error comes on at startup and never turns off.

I've seen that thread mine appears to be a different issue.
Sponsored

 
 







Top