Bed cam (IOD) not working

[Cartoon_209]

So I activated bed cam IOD card from forscan on my 21 5.0 F-150 and it’s not working I tried searching this problem up but no one seems to know the fix or anyone has solved it. Can anyone help me?

Sponsored

 

[Cartoon_209]

Here is a clip of what I’m talking about. I had the camera from the start but it’s not working on the IOD cards

 

[Buyer2021]

Here is a clip of what I’m talking about. I had the camera from the start but it’s not working on the IOD cards

I'm not seeing a clip but FYI there is a limit to the total number of IOD cards the system can handle (sorry, I don't recall the limiting number). Try deleting one of the others you have currently available on your card list and see if that allows the bed cam (IODBC) to display.

Personally, I disabled these cards I never use just to make the scroll-list shorter / tailored to my preferences (but I do have IODBC enabled and working):

Fuel Economy

Eco Behavior

Off-Road (Pitch/Roll)

Zone Lighting

FWIW my values at the applicable address (disables all of the above and enables bed cam card):
7D0-01-03 xxxx xxxx 09--

 

[Cartoon_209]

Clip

I'm not seeing a clip but FYI there is a limit to the total number of IOD cards the system can handle (sorry, I don't recall the limiting number). Try deleting one of the others you have currently displaying in FORScan and see if that allows the bed cam (IODBC) to display.

I'm not seeing a clip but FYI there is a limit to the total number of IOD cards the system can handle (sorry, I don't recall the limiting number). Try deleting one of the others you have currently available on your card list and see if that allows the bed cam (IODBC) to display.

Personally, I disabled these cards I never use just to make the scroll-list shorter / tailored to my preferences (but I do have IODBC enabled and working):

Fuel Economy

Eco Behavior

Off-Road (Pitch/Roll)

Zone Lighting

I am trying to upload video but for some reason it doesn’t let me. Even if I let it to 100%

 

[Cartoon_209]

Clip


I am trying to upload video but for some reason it doesn’t let me. Even if I let it to 100%

 

[Cartoon_209]

@Buyer2021 i have done all of that but I have a bed cam and it works. Just the card doesn’t work at all for some odd reason

 

[Buyer2021]

Yep, I see the working bed cam and the non-working side card.

All I can think of is that your 2021 F150 has an outdated APIM or APIM software and that's causing the problem with the side card display behavior.

You might go to this thread, post about the problem, and see if you get any help there.

Good Luck!

 

[Cartoon_209]

@Buyer2021 Ironically I am updated to version 6.(3.0, just check the link from the forum) Something. I can’t remember. I just know that it had something to do with improved updating and improving of the UI look. Now I have unreal theme on.

 

[Buyer2021]

Now I have unreal theme on.

I do too, but not that additional bottom row of touch buttons (Climate Bar?) .... could that possibly be a factor for some strange reason????

Again, Good Luck!

Sponsored