502 Lariat Swap Tail Lights

[Kmc0929]

My truck has the 502A package with BLIS and Blue Cruise - mine has the lighter tail lights and I really want to switch it to the darker ones.
1) is this plug and play, or will BLIS need to be recalibrated?
2) looks like the cost of a set of the darker ones on eBay are about $1200, sound right? they are all listed as "raptor" models however the set in the picture below was on a platinum I saw in a parking lot. Is there a name for the darker ones? BAP?
3) is there any value to the ones on my truck now? just curious as to what I might be able to recoup

Sponsored

 

[fordtruckman2003]

OEM LED to OEM LED Raptor is plug compatible.
Raptor are all red no amber. I prefer these over the amber turn signals. It does require a Forscan change to get working the way they should be. You set "turn" to be turn and brake, and set "brake" to be turn and brake. Easiest to do in Forscan easy mode.

Most people just swap over the BLIS modules if they come with the lights. Easier that way but you can enter hexadecimal VIN via Forscan in the new ones and they should work.

Value varies I sold my old chrome lights with 30k miles on them on eBay.

I would shop around more. I paid $1200 for front black projector bendy lights. Under $1000 for my Raptor tails. That was a year ago though.

 

[Ricksc]

Not sure but may require some wiring also.

 

[9663mu]

Or you can paint them?

 

[fordtruckman2003]

Or you can paint them?

That turned out really well. I thought of vinyl tint because I suck at painting.

 

[FORDTEXAS]

https://precisionretrofits.com/product/2021-up-f-150-oem-led-taillights/

this is who i plan to go with when the time comes ^
comes with warranty too.

 

[FORDTEXAS]

Or you can paint them?

you painted the inside or outside of the lens?

 

[9663mu]

That turned out really well. I thought of vinyl tint because I suck at painting.

you painted the inside or outside of the lens?

outside of lens. Most important part is taping and making sure it’s as even as possible.

 

[FORDTEXAS]

Most important part is taping and making sure it’s as even as possible.

could NOT be me ? ? ?

Sponsored