2025 F150 Platinum 4x4 Belltech lowering kit installation?

[Sidetracked0480]

Looking for info on installing a Belltech lowering kit on a 2025 Ford F150 Platinum. The truck does not have CCD or the Max trailer tow package, so according to everything I see, the kit should work. My question is regarding the ride height sensor on the back, nothing I see in the kit or installation instructions seem to address it. Has anyone on here have experience with this? Does it need to be relocated or different bracket installed or is there enough adjustment on it from factory that it will still work?

Looking for any information I can get.

Sponsored

 

[513Mugsy]

Well as seeing as I have the not so fancy XL. I didn't need this. But it looks like you may. Ridetech make a bracket for this. The Ridetech lowering kit is an axle flip to get the drop. So I think this makes up for loosing the flat top mounting. So maybe compare your Belltech rear with the Ridetech kit and see if they do the same thing. Here is the link for the bracket.

https://www.beefcakeracing.com/ridetech-12299501/