Search results

Can anyone suggest a respectable alignment shop that knows Fords like the back of their hand in SE WI.? The local Ford dealer didn't do much.They brought in toe but caster/ camber is the same. I will bring a MOOG K100070 caster/camber kit to give the tech more of a range of adjustment. Thanks...

Thanks for the info All adjustable coil overs are out of my budget. I'm good with a 1.5'' drop that a OEM 2wd strut will have. My concern is that a 2wd strut on the 4wd truck will have any camber or caster issues. thanks tom

I'm looking for an cost effective way to lower my front end 1.5''. Some say use 2wd struts on my 4x4 scab. If so, will it cause alignment issues that can't be rectified? Will the 2wd strut have a different spring rate? Or just swap coils. I do not take it off road or tow, just straight line...

That's if you have prime only customers. I don't so I checked the Obdlink and they are at $112 also. I'm getting to find alternatives to amzn.

I'm done playing around with this BAFX reader. so I've decided to go with the MX plus better price at Obdlink than Amazon, unless you have prime then they're both at $112 Thanks for your time fordtruckman

Thanks I think I have an issue with my old adapter. I have the enhanced PIDS w/Fusion been talking to their support with no luck now nothing is reading. How would a OBDLink EX work with a OTG cable to my Android I could use my laptop when I start to use forscan at a later date. Those MX's...

ok. I was going to put it there, but this elder mind thought about placing it in the tech section. As you said I should have continued it in the original.

I purchased the enhanced ford pids. Everything went well but can't seam to pull out the trans temp value. When I'm in the 'View Networks' I have the 'A' network only. There you can find the power train module with 133 supported parameters, including the trans temp. It won't highlight when you...

I purchased the enhanced ford pids. Everything went well but can't seam to pull out the trans temp value. When I'm in the 'View Networks' I have the 'A' network only. There you can find the power train module with 133 supported parameters, including the trans temp. It won't highlight when you...

Thanks fordtruckman2003 I'll give that a try!

Looking for an applicable app that can display trans temps. I have a ELM327 BAFX. The consensus is that the Torque pro does not give me the pid for trans temp.? I'm not into Forscan . Just want to read the dip stick correctly at the specified temp. Do I need to purchase a ford specific pid pkg...

That's a great idea. I often wondered how a sensor could see it. I never knew one could do that without Forscan Thanks HammaMan

Thanks jakearb So now you shed some light on a throttle controller. I live at about 1000ft above sea level so more air and power down here! IF the JB4 gives me more of a flat spot why not a Livernois controller or pedal commander. It might be all that I need with full tank of no ethanol 91...

Thanks for your feedback buyer21 You have a legit point of running 91 all the time . I have only done this with a mix of 87 no ethanol. I'll try full 91 and see if the tip in flat spot goes away

Thanks Jake for the feedback Does the JB4 do anything for the turbo lag at tip in throttle? OR can I run a throttle controller with this JB4 thanks again

Hi, newbie here! What are your thoughts on this piggyback controller? I'm a casual driver, but looking for a little more mid range and to take the flat spot out of tip in throttle. I'm aware of 5 star tunes and others, but you have the ecm foot print. So I'm concerned if something breaks, who...