Search results

Has anyone installed tow hooks on the 2022 models that no longer come with tow hooks? i.e., Lariat?

If you are ordering parts from the dealer, they will go by your vin. If your vin indicates that your vehicle did not come with those parts they will say that to you. If you order on line with ford.com and do not give them your vin, they will sell you the parts. Note: if your vehicle came with...

You are correct. No pulling apart anything. No adding wires to the BCM. The wiring you tap into is already in the truck from the factory. It is only used by the Limited and versions that you purchase the additional options for. All you are doing is adding the short "jumper" wires from the...

Excellent, Thank you!

This is what I did. And it worked. The forscan changes all need to be made and the list of parts and part numbers worked in my 22 F-150 Lariat. Genoz.... I installed Ford parts ML3Z-14A411-F drivers side jumper wire from existing plugged connector (dummy plug) at drivers side to switch and...

Mine has 4, 000 miles on it and it is getting worse. I plan to take it to the dealer at 5,000 and see what they say.

Yes, my 22 Lariat 2.7 liter, 10 speed also does that in any gear above 6th. Anyone have a solution?

IT's downloading. Should be fine. Thanks for your sharing this!

Can't do it until Monday. I'll do it then and post what I have.

All I can tell you is that this is the Forscan settings I used and they worked for my 22 Lariat 501A build. They are also the standard factory settings for bed lights that are installed as a factory option.

Yes mine work with the truck off. Did you apply all 4 of the FORScan changes to the bodycm file. Double check that they all were applied.

If love to have a copy.

ML3Z-14A411-F drivers side jumper wire from existing plugged connector (dummy plug) at drivers side to switch and lamp. ML3Z-14A411-D passenger side jumper wire from existing plugged connector (dummy plug) at passenger side and connecting to passenger side lamp.

Yes. Those are the connections with a dummy plug in place.

Yes. I did all the FORScan changes. Worked perfectly. They are also identical to what is used on the Superduty.

They are the parts that I used. And they worked for my truck which is a 22 F-150 Lariat with Trailer tow package, zone lighting, etc.

Look below the rear bumper at both ends of the bumper. On mine there was a plug with a dummy plug installed at each end of the bumper. This is where those jumper wires plug into.

They will not show up for YOUR vin number but they are Ford parts for the Tremor and Limited. Try Fordparts.com or Lakeland Ford. Don’t give them your vin number since they don’t exist for your particular build.

No video. It’s simple and uses ford parts. But you need to use FORScan to change the body control module settings per CRFuzz posting comments.