Search results

I've used Onshape to make some repair parts on my Bambu Lab P1S but I'm still not good enough with it to do complex things. I don't use it enough to remember the next time I need to! :sneaky: But if the piece you are talking about is fairly flat and simple, you could probably make what you want...

Let us know your results when you go back UP the hill... 😏

I did a write up a while ago on my Eibach 2.0 Coilover install on a 2021 PowerBoost. See this post: https://www.f150gen14.com/forum/threads/another-eibach-pro-2-install.35044/post-616726 A few more pics not in that thread. I read a few complaints about the springs being bowed and mine were also...

Ok, so here's a photobomb of my Non-B&M dipstick install. Yes, this is an $50 Amazon special, but in my opinion the B&M is made in China! I studied images of the B&M product and other than not having the logo laser etched on the handle, it is an exact match, down to the aluminum body finish...

Just to be clear, I know the transmission has MHT in the model designation. I left it off for simplicity since the conversation was about the hybrid transmission pan. Some aftermarket vendors specifically list the hybrid separately from the non-hybrid, but their images still show the non-MHT...

It's when decelerating and applying brakes. I found it would happen at lower speeds/gears approaching a stop, 4th to 3rd or 2nd and probably less than 25mph. I don't think I ever heard anything when accelerating. But I have a PowerBoost so I'm accustomed to feeling the little bump when the ICE...

I'm so glad I ran into this thread! I began noticing a small clunk a couple months ago which at about 65k miles on my PB 4x4. I did a full drivetrain lube & fluid change back in May in preparation for a 3k round trip to visit the grandkids. ICE oil, front & back diff, x-fer case, all with...

Some of those options add more weight than you may think. Also, depending on what configurations such as single, crew, or super crew, along with max tow, the frames are built with different thickness support structure. The 2.7 XL single cab will have the thinnest & lightest frame vs. a Limited...

Actually, there are some that can't carry as many passengers as a that old, well worn work truck! But none that we manage. :wink:

Good show! I’ve always liked the KR wheels over the ‘Dark’ Sport style. But, I’ll see your Defenders and raise you a set of Terrain Contacts! (Pardon the dirt)

Agreed! I really like them now. Especially withe the Eibach coilovers. They have a nice square look vs. the old Hankooks that had a softer rounder look to them. These look more 'tough'. The A/T's would look just that little bit 'tougher' but overall I think I'm on the right tire. They do almost...

Those are the A/T's. The pictures I posted earlier in this thread were the H/T's that I switched to after 1K miles. I lost mpg's and got concerned. But it was just a combination of weather, winter blend fuel, and new sticky tires. The H/T's did the same but not as bad and after 1500miles my...

Here's a good look at the Conti A/T. That's what I really wanted initially. They did look really good. Then I got scared & went with the H/T's instead. Love them too but next time I'll stick with the A/T's and give them a fair chance. Apart from having just 10k less mile warranty, I found them...

I personally like the look of my Conti Terrain Contact H/T's. I initially got the A/T's which admittedly looked a little better but was unsure of the mileage. My mpg's took an immediate hit by 2-3mpg. I had DT swap them for the H/T's because I felt confident they would not be as bad given their...

Likewise. Unfortunately I’m tied to a desk & chair at our KADS MX hangar. I’d love to keep the miles off my 21 PB, but alas, my physical attendance is required. Someone has to remind the techs ‘righty-tighty, lefty-loosey’. 😏

Hey @Snakebitten , you work at Million Air Houston? I work at MAnext, the charter ops of Million Air Dallas. Unfortunately, this is the best we've got...

I'm interested too. I'm happy with the comfort of my cloth XLT seats but honestly, the cloth seats in my previous 2018 STX were even more comfortable and seemed to wear better. The left thigh bolster is about half it's original height. I'm admittedly a heavy guy and since I'm not tall I tend to...

The design engineers accomplished what they set out to do. Create job security!😏

You are correct. I pretty much assumed it had something to do with my Forscan tweaks. Thanks for the confirmation. I know the Manual is also in Ford pass, but I was just curious to see if I could quickly pull it up on the truck screen.

I was changing my oil and forgot the fill quantity so I was going to refer to the Owners Manual only to find this on my screen. It looked different from what I remember (I haven't used it much and definitely not recently). So I typed in 'oil' and... Presto! I get this message. Nothing I do...