Recent content by superfordman

Looks like the full blown heated wheel. MSRP is about $600 which is about right.

I'm going to try and get PSA working on my sisters '22 Expedition over Christmas, so will see how I get along with it and what it'll take.

Ya, your IPMA is all up to date. I bet its your APIM then and the old version its on is the main hang up since all that information comes from it. I looked back and when I first discovered and enabled PSA on my 23, I updated to 23237 shorty after than and it worked on the previous version, but...

No, the DRL circuit is both the headlight and fog, so it would be all or nothing if you disable it that way. Only way really would be to pull the wire.

Ah, I know what your problem is now, unfortunately that HVAC won't work in your case, since it has cooled seat functionality, your DSM doesn't have that so that is why things aren't happy between the two. I should have caught that sooner but still shaking the cobwebs off this how process trying...

Just take a screenshot of all that and post it on here, that'll tell me what I'm after

You could just swap DSM but since the trucks aren't like for like as you said, would have to make sure the everything still worked for power column. As new DSM might just be easier, then just copy your current 25 DSM asbuilt over to the new one and make the changes to enable PRBs. Did you end...

So if PSA is showing in the cruise control menu as an option that is a good sign then. Just use Forscan, under modules tab it will give you everything for all your modules.

Worth a shot to update them, especially if they are older modules. Try to match them up to what yours have right now. Or try to swap one at time, see if one module is the main culprit to the codes. If you have a 23 good chance it is already prewired. You need to look behind the SCCM in the...

Gotcha, good deal there then. Since you enabled PSA in the APIM, does that change the menu option in the cruise menu to "Predictive Speed Assistance"? Or does it still say traffic sign recognition? If the later, then that is the issue and your APIM software is the limitation and doesn't have the...

The DRL voltage is PWM so it will vary off brightness. Since you have a 21, 100% chance the DRL has just failed, so just get a new fog light. Or take the one off the other side, and plug it in here just to check.

Looks like loading your asbuilt didn't take. Try to swap back in your original HVAC and see what codes you have then still. Are the new to you modules you got new or used?

You don't need the subscription but you do need connected nav as that is how the system knows when to slow down/where the curves and speed changes are. Are you up to date FDRS wise? PSA is mainly done the IPMA, so if it isn't updated, that's where you need to look next.

21-23 & 24+ are two different animals when it comes to the IPC. Same values for the most part yes, but way different. On my 23 I did the usual seat belt disable and never saw it again. Not so much on my 24. When the new SDs came out in 23 with the new IPC this was a big issue/nanny. It always...

Good deal! Glad to hear it worked for you also. I just spent the last 3+ hours blasting through my updates since my subscription expires first thing tomorrow morning already but updated everything without a hitch. I noticed the same during install, it gave the option for either new subscription...