Recent content by FaaWrenchBndr

yeah, I can’t answer that question, one I don’t care for the PPE design at two. I haven’t had any interest in the 8.8 rear axleso I can’t help much. Yeah, almost 100 bucks more I got mine using “free points” it’s the only reason I got that one

I do believe Spicer makes the Ford Motorsports cover as well as theirs.

Self tapping screws are designed to be used dry with no cutting oil, grease, or special lubricants

You’re welcome to your opinion. I’ll agree to not agree

No oil needed

Regenerative braking is done through the electric motor in the transmission. It has zero to do with the actual wheel mounted brakes.

https://www.amazon.com/Stainless-Glass-1pcs-Indicator-Transparent-Compressors/dp/B09SVYZNVH/ref=mp_s_a_1_2_sspa?crid=QCD742EY2RF4&dib=eyJ2IjoiMSJ9.dXLJLq0ILCHj4vYV-m3Kax0gN7rLsNYWE_pgNPF_ytuy6_liLVL7HeGTEdTAafvGXJKxXwDN42LMXIElCQmp2Hq55jDLe-KJHWtI9rzfXSzdhI1UVBK9AiP0EW4Xn9PEMbZGruKxGfj45ik8ozFuWZ...

spicer makes him for the 9.75 and 8.8 https://www.summitracing.com/parts/sdh-10023538?seid=srese1&gclid=Cj0KCQiAo4TKBhDRARIsAGW29bfSxl860oVtblYpB0ledwUtrj-QhAi_XVPh0ADfyb-JDVSJDKYL3k0aAhKLEALw_wcB

Changed out the Timbren bumpstops for SumoSprings. The Sumo set is a softer, more progressive “bump stop” . A bit less forgiving when they contact the plate.

Great way to void your warranty. over 10k is bad juju

I don’t have a video of it, but yes, using the OBD II MX+ it does charge when you’re in the green zone while braking

I used a NOCO extension and cut it to the needed length, as ordered it was 10’ I crimped/soldered ring connectors and heat shrinked I touted it was shown. It is attached with zip tie to the grille framing under the radiator air deflector. When not in use, I simply took it behind the front of the...

Shielded wiring. The radio’s shielded cable or antenna is usually the culprit

Well, that’s a new one haven’t seen that before

No, but it displays water and it does leave behind a little bit of a preservative for anti-corrosive inhibitor