Recent content by Blackbetty406

Which defowlers did you go with? and just wanna make sure this is catLESS downpipes right?

Spaced what i was doing, actually wanted to disable active air dam (just ghost codes now) nothing on screen but have a tremor skid plate coming

Ok ill give that a shot thank you

My truck 2023 f150 3.5 eco, tuned with the ford procal and went to use forscan and no connection (it wants the program code which i entered, still says contact forscan) second issue was figuring i could return to stock but no such luck, procal says ecu read not write available. Am I looking...

One quick question, just wanna verify any 21-23 digital dash ipc will work? I found a zero mile lightning one and want to make sure it'll work, thanks

Well I'll be damned that's the connector I believe i ended up tracking down. Just pull oem harness side pins and reinstalled in the mx150 is all? If so perfect thanks

Another quick question and maybe you mentioned it earlier, did you just repin the factory harness for the headlight connection? If so you happen to have the part numbers for the pins used and connector by chance?

Sounds good. Now with hcm/bcm wire would the gauge of wire need a bump in size? I believe it's either 20 or 22 gauge now?

I'll have to double check to see if the harness even has led out pins but from the instruction sheet I got for forscan I had to shut those off

Ok, I have the precision retrofits harness (ryan b actually) I wanna say lin bus wires are there already, but I just trying to remove the pwr wire that is always hot, and if I can T into that hcm/bcm wire to that single pwr wire I believe that fixes the "always hot" and ghost codes for swivel motors

So with your headlight motor you used the old vpwr from the reflectors? So did you move the vpwr from the reflector side to the projector? I wanna say fuse f21 on my truck is like headlights on or something

I had those codes until I repinned the hcm module for actuators, and yes I went from reflector to projector on my lights I'll give the negative cable a try, I also went months with it being good to go until it started the "check headlight" maybe month and half ago, im also using the euro...

So it seems I'm having a similar issue that just arose, I now have the dtc for swivel motors, and during the AM wither the left or right mostly right headlamp now doesn't raise back up after start up (manually adjusted it back up). Wondering what hcm settings you have set up, and making sure I...

Anyone pull the trigger on this yet?

Sweet sounds great appreciate the help