4/26 Build Week

[succeed23]

Not to oversimplify but a lot of people with electrical issues are b/c 1) fuses are not completely set, I know on my 2 trucks 90% were not pushed in all the way. 2) loose battery cable.

Where is the fuse box located?

Sponsored

 

[Ron]

Well guys, I'm not as active as I was. Have faith, to any of you who still haven't gotten a truck yet. It's coming, and as I've said previously well worth it! Still loving this new truck.!
In addition to the other upgrades I've now added two swing out tool boxes, tonneau cover in the mail and some other small stuff like seat covers in rear for kids.
Brush guards / grill guards are severely back ordered and/or companies like Westin HDX haven't even developed one yet for all these cameras and sensors, but I'm hoping I may have found a loophole with Frontier grill guard or the square tubing Thunderstruck which are supposedly both going to work with all the cameras and sensors and aren't nearly as badly back ordered....
Only big difference I've made since last post is we put on 295/70-18s on the factory rims with a 1.5" MotoFab level kit. I'd say that's about perfect level for what I want on the power boost. I didn't want to be too high when towing or with a load in the back popping a ?... although I admittedly haven't done any towing yet. Definitely glad I didn't go any higher level.... Or bigger tires...
295 70 18s fit perfectly under this FX4 power boost with no trimming, no rubbing and room to spare. Now got to use the step to get in or hop... No longer just slide in.

Also, I know a lot of you have already kitted your trucks out...
Ford dealerships near me.... same as truck shops have been no help with recalibrating speedometers or can't anymore apparently. Last several trucks I bought it wasn't an issue pretty frustrated. This is rural Georgia. Everybody's got a lift and giant tires. My truck is very conservative comparatively....
So I ordered a hypertech speedometer recalibration gizmo. Unless ya'll tell me otherwise. Thanks!
also unpaid and completely unsolicited prop... but giving much props to Stage3 motorsports for all the help. Ask for Frank or message him on here. Great guy to deal with and get a forum member discount on all these accessories

 

[Ron]

Bushwhacker trail armor rocker panels

 

[ScottBB]

Where is the fuse box located?

passenger side, engine compartment, all the way toward the window. Little clip top comes off. I guarantee when you start pushing fuses and relays in there are a ton that will "click" into place b/c they were not set. This can cause a ton of electrical issues.

 

[Markl]

passenger side, engine compartment, all the way toward the window. Little clip top comes off. I guarantee when you start pushing fuses and relays in there are a ton that will "click" into place b/c they were not set. This can cause a ton of electrical issues.

No issues so far for me but will check that this weekend! Thanks for the info!

 

[scottmanser]

Why do I feel like I'm the only one in this build week who is still waiting for their truck? I'm starting to feel lonely.

 

[CarolynStride]

Why do I feel like I'm the only one in this build week who is still waiting for their truck? I'm starting to feel lonely.

There are a few of us. Ordered 3/22, built mostly 4/28, eta 9/14 right now.
I agree - this thread has become a lonely place.

 

[succeed23]

There are a few of us. Ordered 3/22, built mostly 4/28, eta 9/14 right now.
I agree - this thread has become a lonely place.

We are with you guys! The majority of us have our trucks, but we are still posting in this thread to give you guys still waiting an active thread to vent, talk about ideas for your trucks, and to provide 4/26 with one thread that has just about all the information one would need for their truck whenever it arrives. A great example is the information @ScottBB provided about the loose fuses. Make sure you guys make mental notes of all these minor issues so that you have less issues than we did!

 

[Roady]

We are with you guys! The majority of us have our trucks, but we are still posting in this thread to give you guys still waiting an active thread to vent, talk about ideas for your trucks, and to provide 4/26 with one thread that has just about all the information one would need for their truck whenever it arrives. A great example is the information @ScottBB provided about the loose fuses. Make sure you guys make mental notes of all these minor issues so that you have less issues than we did!

100 percent agree. I'm all for keeping this thread going. Sharing our experiences, issues and stories.

I admit I was a little sad when I deleted all my bookmarks of trackers. For people waiting, hold on. Worth the wait.

 

[Papawsnow]

passenger side, engine compartment, all the way toward the window. Little clip top comes off. I guarantee when you start pushing fuses and relays in there are a ton that will "click" into place b/c they were not set. This can cause a ton of electrical issues.

I've not had any issues, but decided I should check. DANG! I believe that I set every single fuse in there. Probably would have been bouncing along logging roads in Michigan this fall, bounce one out. Not a good day! THANKS ScottBB for the heads up. I never would have even thought to check without these forums.

 

[ScottBB]

I've not had any issues, but decided I should check. DANG! I believe that I set every single fuse in there. Probably would have been bouncing along logging roads in Michigan this fall, bounce one out. Not a good day! THANKS ScottBB for the heads up. I never would have even thought to check without these forums.

Yeah it is absolutely insane how many fuses are not set in place. Both of the two F150's and maybe 5 were in place. My 2021 Jeep Wrangler came the exact same way, I opened the hood and pushed them in place in front of the salesman and he was shocked at the fact all of them needed to be set in place. QC isn't what it used to be lol.

 

[RayRay]

I've not had any issues, but decided I should check. DANG! I believe that I set every single fuse in there. Probably would have been bouncing along logging roads in Michigan this fall, bounce one out. Not a good day! THANKS ScottBB for the heads up. I never would have even thought to check without these forums.

Same here.
No issues but I thought I would check and sure enough at least 75% were not in all of the way.
Thanks for the heads up ScottBB

 

[David32]

Why do I feel like I'm the only one in this build week who is still waiting for their truck? I'm starting to feel lonely.

I’m still here. Stopped by my dealer Thursday and was told that my truck was in Davenport. Received a call back Friday from the salesman saying it was now in Albuquerque waiting to go the last 10-15 miles to the dealership. He wasn’t sure if it would happen Saturday or Monday. Salesman called again Saturday afternoon and said it was in. Stopped by on way home from shoppig to see it…they had just taken it to the back to perform the PDI…. Guess we’ll see/get it Monday PM.

 

[ScottBB]

Same here.
No issues but I thought I would check and sure enough at least 75% were not in all of the way.
Thanks for the heads up ScottBB

it is crazy that while everything may be fine right now, those loose fuses are just an issue waiting to happen and can cause dealers to chase gremlins b/c they can't figure out why "it isn't happening now" type of electrical issue. Doesn't take much to lose connection on a fuse and have something cut in and out, reset, etc.

 

[CarolynStride]

I was really good and went hiking and didn’t check trackers all weekend. Today every thing is null. No date no status, no nothing on all the trackers I know of.
Window sticker reads the same. So they didn’t start over lol.
maybe I will get a call tomorrow……

Sponsored