That's my thing with the power folds, I would definitely like to at least have the turn signal mirrors for sure. I'm thinking about the keypad also, but changing the mouldings to the gloss black.
Are you buying the camera mirrors used, ebay, junkyard??. I've been searching ebay, and junkyards too!!
Man, that 12" screen swap is on point. There are a few guys on IG that offer the setup, but I want Katzin leather too, I'm like a kid in a toy store ???
Most likely used. Ive been looking all over as well waiting for the right deal to pop up but im in no rush
I love it. I will be doing those as well at sompoint. I'm the same way. I've been neglecting my actual show truck for this lol
I've got another project that I use as a show car. The STX, is my daily driver, but I tend to go deep with customization. Lol!!!
Yes the factory keypad. It It wasn't to bad once I figured out how to run the wire for the keypad as to not interfere with window. Factory keycode was on the back of the bcm and enabled in forscan. Works perfect, one of the things I missed the most about my 2011.
Do you have the part number for the b pillar mounding for the key pad?
This is what I used. Install took maybe 10 minutes and forscan was a few minutes. Coin holder pops out and there is a plug attached to it, the controller plugs in there then pops in place. The module is under the dash, left of brake pedal. I had what I believe is a dummy module maybe but there are 2 screws to undo and pops out. There are 2 plugs to unplug and plug into new module.
Do you happen to have part #s?This is what I used. Install took maybe 10 minutes and forscan was a few minutes. Coin holder pops out and there is a plug attached to it, the controller plugs in there then pops in place. The module is under the dash, left of brake pedal. I had what I believe is a dummy module maybe but there are 2 screws to undo and pops out. There are 2 plugs to unplug and plug into new module.
That looks great!!Katzkin rocks!
