2022 Lariat cargo light wiring harness parts

[jj4567]

Anyone know if this kit would work on our trucks?

https://www.tascaparts.com/oem-parts/ford-bed-cargo-illumination-gl3z13e754a

Waiting for the next version of this for ‘21 (Job #2) & ‘22 MYs.

https://www.starkey-products.com/Ford-F150-OEM-Style-Bed-Lighting-Kit-2021-2022

Sponsored

 

[StoneGray22]

Waiting for the next version of this for ‘21 (Job #2) & ‘22 MYs.

https://www.starkey-products.com/Ford-F150-OEM-Style-Bed-Lighting-Kit-2021-2022

But from what I've seen, the Starkey kits don't come with the switch/button to install in the bed, correct? So they only illuminate when you unlock via fob, or through the switch inside the cab.

 

[jj4567]

But from what I've seen, the Starkey kits don't come with the switch/button to install in the bed, correct? So they only illuminate when you unlock via fob, or through the switch inside the cab.

If Ford releases an OEM Bed lighting kit for 22MY, I’m all in. Not holding my breath though. They screwed us by moving the bed lights into the Bed Utility package.

 

[Genoz]

Waiting for the next version of this for ‘21 (Job #2) & ‘22 MYs.

https://www.starkey-products.com/Ford-F150-OEM-Style-Bed-Lighting-Kit-2021-2022

Looks like it fits 2016-2017

 

[StoneGray22]

If Ford releases an OEM Bed lighting kit for 22MY, I’m all in. Not holding my breath though. They screwed us by moving the bed lights into the Bed Utility package.

Completely agree.

Maybe the price of gas will plummet and I'll be able to justify getting the 2017 kit to test out! Lol

 

[kartindick]

Driver side is on indefinite back order. I had to make mine. Plus you will have to run a wire to the BCM. From the driver kick panel to the BCM connector B
The passenger side was available when I got mine I ordered about 4 months ago.
I can give you part numbers Monday when I’m back in the office

also you’ll need to program the bcm

Can you expand on this additional connection? I have everything else I need.

 

[Jesse-Infotainment]

Can you expand on this additional connection? I have everything else I need.

Driver kick panel there is a connector. C238 Pin 4 white/Blue. It comes from the Headlamp switch. One side is populated the other is not. You need to run that circuit. It terminates at the BCM C2280E Pin 8

This is based off my truck a Job 1 21 XL. Yours could be different. I do not know if Ford kept it the same in 22

 

[kartindick]

So I don't think they are the same and I am not sure if you can still help. I believe I found the connector, its above the hood release and grey in color with 30 pins. I found many pins with mis-matching connections, on the connector that I pulled out, 3,6,12,13,15 and 16 had no wires, on the body mounted side only 3,15,16,29 and 30 were missing connections. Hoping I have the right connector. I haven't found my way to the BCM yet...I am guessing the black box up in there a little more? Thanks for helping. I am new to opening these up...I didn't mess with the last F-150 this much, but missing these lights has me motivated.

 

[kartindick]

I acquired some additional wiring information and was able to identify all the plugs and wires and that wire "CLN13" was already there and I tested continuity from the switch to the BCM. To help others, C238 is the beige plug in the drivers kick panel and plug C2280E at the BCM which is behind the pull away panel on the passenger kick panel (its part of that fuse box), the plug was at the top towards the front of the truck, it has 52 pins and they are all 22ga, most of the others had larger wires. I needed to remove the glove box and the tray above the foot box to access it. The lights still aren't working, so I am continuing to work this problem and will update this when I do. I have ForScan, but the programming doesn't appear to be doing anything.

 

[unafFORDableXLT]

2022 MY, 12/2021 build, XLT 302a.

I ordered what the dealer said I needed, 2 lights, a switch and left, right harnesses. The right side is fine and plugs right in after removing the dummy. The left side is a female to female.

If I’m reading correctly, it’s because I also need a harness from the front to rear, where both existing and new LED harness would plug into?

Got a part number?


Here’s a picture of what I got.

 

[unafFORDableXLT]

Did you get yours working?
Sounds like even with the correct harnesses, it’s still not plug and play.

I acquired some additional wiring information and was able to identify all the plugs and wires and that wire "CLN13" was already there and I tested continuity from the switch to the BCM. To help others, C238 is the beige plug in the drivers kick panel and plug C2280E at the BCM which is behind the pull away panel on the passenger kick panel (its part of that fuse box), the plug was at the top towards the front of the truck, it has 52 pins and they are all 22ga, most of the others had larger wires. I needed to remove the glove box and the tray above the foot box to access it. The lights still aren't working, so I am continuing to work this problem and will update this when I do. I have ForScan, but the programming doesn't appear to be doing anything.

 

[CRFuzz]

Through Google searches/cross referencing/visual lookups, I've identified (I hope) all the original Molex connectors for the bed light harnesses. My truck appears, based on wiring/connector/service data, to have connectors at rear of truck for the bed lights. I've ordered all the connectors and pins from Digikey for around $15+shipping. I'll post a list when I receive them to confirm.

I purchased the OEM bed switch and after market lights from Amazon (OEM plug).

These are also the Forscan changes I'll be trying when I get these harnesses built. (Found I believe on a Tremor forum)

 

[Jesse-Infotainment]

Im just seeing this. I dont know why. Did you enable bed lighting in the BCM?

Also the bed lights only turn on with the switch in the bed. I didnt know that until I asked.

If I am reading right you are saying the wire to the BCM from the kick was already populated? If so then That is interesting. Mine was a early 21 build. Mine was not populated. It is also an XL.

If its there then the circuit should be complete.

726-46-01

xxxx

**xx

xx--

00 =

BLC DISABLE

01 =

BLC ENABLE

 

[jj4567]

2022 MY, 12/2021 build, XLT 302a.

I ordered what the dealer said I needed, 2 lights, a switch and left, right harnesses. The right side is fine and plugs right in after removing the dummy. The left side is a female to female.

If I’m reading correctly, it’s because I also need a harness from the front to rear, where both existing and new LED harness would plug into?

Got a part number?


Here’s a picture of what I got.

I'm still stuck on the "I ordered what the dealer said I needed . . . " statement. Unless I missed it, there is not an OEM kit to install the MY22 LED Bed Lights. IMO, your dealer shouldn't have recommended anything. I absolutely hope someone figures it out eventually - I'm in the same situation w/ my MY22. Again, just surprised your dealer suggested anything at all.

 

[unafFORDableXLT]

I went in while waiting for the supposed trailer brake recall fix (that doesn’t exist) and the parts guy knew exactly where to find everything - like he’s sold ‘em before.
Why in the world would these lights NOT be plug and play? Makes no sense. They just need a power source.

Sponsored