TPM showing dashes

[Kanuck]

I looked on Ford Pass this morning and my TPM are showing dashes. I went out to the truck and checked the IPCM and they are dashes as well. I had parked the truck on Thursday and checked my battery voltage. It was at 12.55 volts. I measured it again today. It was at 12.33 volts. Thought that maybe the truck received an OTA because the screen showed the download symbol. Just a phantom update. Still shows my SS-NS update from last April. First time this has happened with the pressures not reported. Battery was replaced in Sept to a H7 and fully charged with the BCM being reset.

Any other members had this happen? I haven't driven the truck yet to see if they will how up.

Sponsored

 

[Big Dog Daddy]

I've had this happen to me a couple of times, Each time it happened I found that after taking the truck for a short trip Fordpass went back to normal and registered the tire pressures again.

 

[Kanuck]

I haven't driven the truck since last Wednesday. Will take the truck for a drive and see if the pressure reading comes back.

 

[powerboatr]

Yes most likely
Battery state of charge not letting all the modules check in
I get weird ones often
This one my favorite
The 150 had not had the dual rear wheel mod?

Sponsored