BFD05
New member
- First Name
- Brandon
- Joined
- Jul 22, 2025
- Threads
- 1
- Messages
- 3
- Reaction score
- 0
- Location
- Georgetown MA
- Vehicles
- 2021 Ford F150 2.7 XLT
- Thread starter
- #1
Hey All,
I removed my center console and swapped to a middle jump seat to gain the extra seating. The middle console had a 110V plug on the rear for the back seat. This is not installed on the middle jump seat, I just have the bed mount and the dash plug. I recently noticed the outlets are no longer working. I checked the TSB related to this, and found no corrosion or issue. When I unplug both connectors from the inverter, the lights illuminate on the plug and the inverter works temporarily, then shuts down again. I saw a video saying the inverter has a sense signal for the LED's, if they are not present or working, it will error out and shut down. Wondering if anyone has run into this or has the wiring schematic so I can jump out the outlet LED for the console. Thanks
I removed my center console and swapped to a middle jump seat to gain the extra seating. The middle console had a 110V plug on the rear for the back seat. This is not installed on the middle jump seat, I just have the bed mount and the dash plug. I recently noticed the outlets are no longer working. I checked the TSB related to this, and found no corrosion or issue. When I unplug both connectors from the inverter, the lights illuminate on the plug and the inverter works temporarily, then shuts down again. I saw a video saying the inverter has a sense signal for the LED's, if they are not present or working, it will error out and shut down. Wondering if anyone has run into this or has the wiring schematic so I can jump out the outlet LED for the console. Thanks
Sponsored
