• NOTE: THE MEMBERS MARKETPLACE SECTION IS FOR PERSONAL USE ONLY - I.E. SELLING ITEMS/PARTS FROM YOUR PERSONAL VEHICLE ONLY. ANY SALES OF ITEMS MADE FOR COMMERCIAL PURPOSES (I.E. MAKING/SELLING MULTIPLE ITEMS, TAKING ORDERS, ETC) BY ACCOUNTS NOT AUTHORIZED TO CONDUCT COMMERCIAL SALES ON THE SITE IS A DIRECT VIOLATION OF OUR FORUM RULES AND TERMS OF SERVICE AND WILL RESULT IN THE PERMANENT SUSPENSION OF YOUR ACCOUNT.

    ⛔️ EFFECTIVE JANUARY 16, 2023 ⛔️ 

    ATTENTION SELLERS: All users who wish to sell in the marketplace are now required to abide by the following RULES. If a sales thread/post created ON OR AFTER January 16, 2023, does not comply, it is subject to DELETION without notice.

    ATTENTION BUYERS: If you see a non-compliant sales thread, please REPORT the thread and take CAUTION when transacting.

    Rule #1 - Post a picture of the actual item you are selling (NO stock photos).
    Rule #2 - The picture must include a REAL piece of paper with your Username and the Date written on it next to the product you are selling. NO photoshop or digitally edited photos are allowed.
    Rule #3 - NO "feeler" threads are permitted. This section is only for items that are actually available and ready to be sold currently.
    Rule #4 - The listing must include an asking price. OBO (or best offer) is allowed but it must be accompanied by an asking price.
    Rule #5 - No "threadcrapping." Classifieds threads are not meant for negative discussions. Comments on pricing are not allowed. Only people with genuine questions and interest in the item for sale should be posting in the classifieds threads.
Sponsored

Halogen BLIS to LED BLIS Tail Lights Conversion Harness - Need Help

SupraVu

Well-known member
First Name
Vu
Joined
Mar 20, 2022
Threads
2
Messages
135
Reaction score
224
Location
Boston, MA
Vehicles
A truck, SUV. another SUV, and a sedan
Hi everyone.

Has anyone done this mod to their truck? I bought the correct conversion harness and am getting an error message stating blindspot detection with cross traffic needs configuration.

In addition, brake and signal lights do not work, but the red LED border around the lights does. Any help would be greatly appreciated.
Sponsored

 

ProperCrab

Well-known member
First Name
Walt
Joined
Jul 23, 2021
Threads
2
Messages
122
Reaction score
259
Location
Houston
Vehicles
2021 Single Cab 4x4, 2022 Crew Cab 2WD
Occupation
Commercial Project Estimator
Hi everyone.

Has anyone done this mod to their truck? I bought the correct conversion harness and am getting an error message stating blindspot detection with cross traffic needs configuration.

In addition, brake and signal lights do not work, but the red LED border around the lights does. Any help would be greatly appreciated.
It sounds like you may have a few issues going on.
Did you swap your original blis modules?
Did you make sure to not mix them up?
Your tail and turn signals should still be working, they should flash fast.

I would start with making sure the forscan changes are correct, to correct the blindspot detection with cross-traffic errors you need to go to both the
SODR & SPDL modules, as-built and hit load factory AB button at the bottom, follow the prompts.

This will program the blis models to your truck.
 
OP
OP
SupraVu

SupraVu

Well-known member
First Name
Vu
Joined
Mar 20, 2022
Threads
2
Messages
135
Reaction score
224
Location
Boston, MA
Vehicles
A truck, SUV. another SUV, and a sedan
It sounds like you may have a few issues going on.
Did you swap your original blis modules?
Did you make sure to not mix them up?
Your tail and turn signals should still be working, they should flash fast.

I would start with making sure the forscan changes are correct, to correct the blindspot detection with cross-traffic errors you need to go to both the
SODR & SPDL modules, as-built and hit load factory AB button at the bottom, follow the prompts.

This will program the blis models to your truck.
Thanks for the reply.

The LED tails I bought were brand new and came with BLIS modules so I did not think I needed to transfer mine over from the halogens? The conversion harness was labeled PASS and Driver side so I double checked that to make sure that I didnt mix them up.

My FORSCAN cable should be arriving today, and I will tinker with those settings you described.
Sponsored

 
 







Top