Forscan changes not transferring to Ford servers

[ProHERO]

So I added APA back to my 22 Plat back in October with an NA IPMA. PMI was done and all the Forscan changes made went through and worked as intended. After reviewing the Motorcraft as builts I noticed none of the IPMA changes made have transferred to the Ford servers. On Forscan the changes are still there and APA works as it’s supposed to. Any ideas as to why the changes haven’t made it over yet?

Sponsored

 

[Jesse-Infotainment]

Ford has changed the conditions for them to be synced.

 

[ProHERO]

Ford has changed the conditions for them to be synced.

Thanks for the quick response Jesse! Anything I can do on my end or is it just a sit and wait and it’ll happen someday? I did pick up a Mongoose so if I need to go into FDRS I can do that.

 

[Jesse-Infotainment]

Thanks for the quick response Jesse! Anything I can do on my end or is it just a sit and wait and it’ll happen someday? I did pick up a Mongoose so if I need to go into FDRS I can do that.

Yes. You will need to PMI the IPMA. THE ESN mismatch is why the changes have not been absorbed.

You can do a PMI then make the changes again and the next OTA you should see the changes link up

 

[ProHERO]

Yes. You will need to PMI the IPMA. THE ESN mismatch is why the changes have not been absorbed.

You can do a PMI then make the changes again and the next OTA you should see the changes link up

Will do! I’ll get that done. Is it safe to assume I won’t get an IPMA OTA until I complete the PMI?

 

[rpold150]

Yes. You will need to PMI the IPMA. THE ESN mismatch is why the changes have not been absorbed.

You can do a PMI then make the changes again and the next OTA you should see the changes link up

Hi Jesse, I believe that you PMI'd my IPMA when I did the APA update back in May. I also added multi-contour seat in June. I checked Motocraft AsBuilt a month ago and none of those changes have been uploaded to the mother ship.

Do you know what the new conditions are for uploading?

For my history after receiving the truck Oct 2022:
Jan 7, 2023 - added camera auto-on with proximity alert (these have uploaded to AsBuilt)
Jan 29 - received OTA 3.5.3 (the only update that's been sent to my truck)
May 7 - IPMA swapout and added APA
Jun 25 - added MSC seats

No other OTA since Jan 29 and neither APA or MSC updates have gone to Ford.

As always, appreciate your wisdom!

Sponsored