21 Bed Cargo Light Forscan Changes

[grnsnake97]

Following @Jesse-Infotainment updated information about what changes needed to be made for the bed cargo lights to work, I attempted to make the changes in Forscan. When I try to change the value at 726-50-02 I get an error stating Writing Blocks Failed - Incompatible Configuration. I was able to change the other values without an issue. Needless to say, my lights do not work. I also had to change the rear harness to add the correct pigtails for the lights, so there may be an issue there as well. Thanks for any help y'all can give me.

Sponsored

 

[grnsnake97]

726-46-01 xxxx 01xx xxxx
726-81-01 0201 xxxx xxxx

 

[grnsnake97]

Trying to change it to 04 per this thread https://www.f150gen14.com/forum/threads/bed-lighting-stopped-working-after-ota-update.30917/ I can't remember what the value is currently, but I think it is 00. Unable to connect currently to see what it is, but can get back with that info later.

 

[grnsnake97]

Correct

 

[grnsnake97]

I'll give that a shot and see what happens.

Sponsored