2021 Lariat Leveling

[fetoma]

Folks,

My 2021 Lariat 5.0 has a huge difference in height from the ground to the top of the fender well. Rear is at 40 inches and the front is at 36-3/4 inches. That's a 3-1/4 inches difference. I'm looking to just use some leveling blocks for the front. Not a lot of 3" spacers out there. Anyone here used the Motofab 3" spacers? Any suggestions for a different manufacturer?

Thanks,
Frank

Sponsored

 

[Graygoose2021]

hey Frank, check with Frank at @Stage3Motorsports they have everything you need.

Also, the newer F150's have a larger rear wheel well over previous years, so optially it looks more off. I thought same thing until Readylift told me about it. So measuring from the ground will make it seem way off.

 

[9663mu]

In my humble opinion , 2.5 is most you should go with spacer. Less stress on other components .

 

[Graygoose2021]

agreed, if I were doing one, Id do thew Ford Performance Bilsten setup.

 

[9663mu]

hey Frank, check with Frank at @Stage3Motorsports they have everything you need.

Also, the newer F150's have a larger rear wheel well over previous years, so optially it looks more off. I thought same thing until Readylift told me about it. So measuring from the ground will make it seem way off.

Frank is like your neighbor next door. When talking to him, you tend to forget he works for Stage 3 because hes is so cool and knowledgeable with his time. He breaks things down very well! Way to go Frank the tank!

 

[Moosesteak]

Shouldn't you replace the upper control arm to reset the caster angle back to stock position for better alignment

 

[Zyvin]

Removing rear blocks; is free.

Sponsored