Search results

Yes that's the one I went with for that exact reason. Just haven't tackled a hidden/discrete front receiver yet...

Ha yes I have definitely found the LLM's to be helpful at times, but you have to take them with multiple grains of salt. I questioned it...perhaps "steered" it as HammaMan said, and it reversed it's recommendation. I'll order the NGK 95605 (LTR7BHX) since it is the "one-step colder" plug. Also...

Ok I have a Livernois-tuned PB with 40k miles on it. Advance Auto Parts showed the NGK 90495 as being compatible with my engine so I asked ChatGPT what the difference was between that one and the NGK 95605 was and it said the 90495 was the colder plug. Is that BS? The AI-generated response...

Thanks for the tips! I'll have to test that out and throw a meter on there to see what happens with the amps/volts. Here's the connection at the rear. I used a Dremel to sand off the paint around the existing ground and tapped into that. I was hesitant about using the frame as well, but I had...

Where/how do you attach your 280ah battery to the DC/DC converter? How hot does your 10ga wire get if it's passing 200a through it? My battery has an advertised 100a BMS so is it safe to assume that if I attached it to the correct place, it would only pull 100a max off the truck?

Ya I couldn't find a nice 120v air compressor/tire inflator that was really compact that I can mount to my molle panel and that was simultaneously capable of high volume output? Let me know if you find anything though. Agree on being careful with usage - it would primarily be when the truck is...

I had been wanting 12v power in the bed of my 302A PowerBoost to power various accessories such as a DC air compressor for inflating tires when done off-roading, inflating paddle boards for lake days, charge phones off DC power while camping, etc. When searching the forums, it appeared that a...

Yup here it is: https://www.tascaparts.com/oem-parts/ford-switch-ml3z13d730ka Edit: Actually the one I linked above is the traction / HDC switch (PN: ML3Z-13D730-KA; installed/working in my XLT/302A with the 12" screen). The hazard / HDC switch (mentioned by HomeBoy below) is ML3Z-13D730-CB.