Search results

I don't know what was exactly done regarding any changes made by Jesse-infotainment and Forscan, I know Jesse-infotainment worked with Forscan on the DSM module file.

Was the dealer able to get the running boards working correctly? I don't believe the motors on the boards themselves are bad. It's probably the same issues I was having with the extended running of the motors.

Well after working with Jesse-Infotainment he was able to get my module working correctly. My running boards are now acting the way the did before the update.

I recently performed the DSM update and I’m experiencing the same issues with the PRB and the extended running of the motors. Not sure what the problem is, it seems like the module isn’t reading the hall sensors in the boards after the update. I did replace my battery as we thought that could be...

Yes it turns out that my trucks IPMA didn't support the front sensors and had to be replaced with one that was compatible with the front sensors. Once the new module was installed all is working as intended.

I turned it back off, maybe the sensors will work in the morning, they were not working after I made the changes

Truth be told the codes only came in once I enabled the front park assist in the IPMA, which wasn't on the list of changes but I thought it was required. On a side note my adaptive cruise add is working all except the intelligent features. which is in improvement.

I'm looking into this addition to my 2022, I found that my connector is missing pins 7,8, 21,29, & 30. Do you by chance know what these pins are controlling, I installed the harness, and completed the changes in Forscan but I was getting errors on all (4) new sensors. I'm guessing somewhere I...