Search results

My address now reporting correctly after 6.4 installed as well.

I see 6.4 is downloading right now on mine, I will report back when installed. Thanks

I was told by Fordpass support that it was a known issue after 6.2 (v1) that it affected address in fordpass for some trucks always showing in Dearborn MI and they were working on it. Then I recieved a call 2 weeks ago saying that the fix was ready and that it would update it the next 2 weeks...

I spoke with Fordpass support today and was told it is a known issue after 6.2.0 update, Ford engineers are working on a fix but no time frame is given. So I guess we just wait unless someone has found a fix.

I too am having the issue of showing truck in Dearborn, MI after 6.2.0 update last Friday. I have tried uninstall reinstall of Fordpass with no success, I have not tried unhooking the battery yet but may give it a try.

I believe I found the problem one of the 2 small blue wire pins in brown heated steering wheel plug was not fully seated. Therefore not making contact with pin on clock spring. Thanks!

Put with g201 and pin 15 to bcm I have 12 volt across 2 pins to sccm this is a temp code like termister in the wheel is bad. If I unplug the heated plug from the clock spring then I also get heated steering wheel heating circuit open too. If I back probe the 2 blue wires at the steering wheel...

Just installed HSW on 22 F 150 lariat. Installed wiring, sccm, Hvac control did all forscan changes. Light comes on but wheel does not heat up and have a code in sccm for u210a temperature sensor. Circuit short to battery or open. Has anyone seen this or have any idea what I need to look at...

Adding HSW to 22 lariat don't have anything. But bought used steering wheel, sccm w/clock spring, and hvac control w/hard button, and harness. This question may be in this thread but I did not run across it. Do I only need to enable heated steering wheel in sccm and hvac control. Or is there...

Options all cut, no nav, no xm

I had to change 726-39-02 xxxx xxxx x* in BCM from a 0 to a 1 (Rain light sensor present) to make mine work on a 22 Lariat, may be worth looking at.

I have read you need to change 727-01-01 and 7D0-01-01 but I have also read you just need to change 727-01-01 can anyone confirm what needs to be changed. I have 727-01-01 B828 01F1 0002 right now/ 7D0-01-01 0001 0002 8C68. Thank You for any advise you can give. Thanks!

Can anyone confirm this? Thanks in advance!

If what I read is right what I have in my 22 lariat pics attached, I should be able to activate sirius with an as built change and antenna.