Search results

Yes, that is actually true the grill doesn’t have to be removed. But removing it( which is the easiest part of the install) gives you more room for the top bumper bolts. Only a handful of clips holding it in. Same end result.

Good luck. Let me know how it’s turns out!!

Here’s what I done, I picked up the plugs I needed (as shown in pictures, from Amazon) I then joined them together to make a “extension “ of the factory headlight harness. Doing it this way you tap into the extension and not the factory wiring. I then dropped a wire down to the fog light plug...

All you gotta do is remove plastic loom from the extension harness and solder fog light connector to it. Then unplug factory plug from headlight and plug it into one end of extension harness and then plug the other end back into the headlight and that’s it. Works perfect and you won’t have turn...

Yes that’s right, wire them to the low beams. Here’s what I done so that none of the factory wiring was cut into. I ordered these connectors from Amazon (see pics). Soldered them together (one for each side) and simply turned everything into plug and play. Very simple and totally reversible as...

Just finished fog light install on my 22 stx. Although removing the grill and bumper assembly may seem a little intimidating the project itself really wasn’t that bad. Start to finish it took about 3 hours ( not including beer breaks). The Diode Dynamics video does show everything you need to...

Appreciate the offer but lights on the way. Should arrive any time

Hey guys, new to the forum and i have a 2022 stx with the 18 inch wheels (no fog lights) ordered an aftermarket set to install. As i see it if iI remove the active air dam there should be enough room to install fog light assembly, the question is will there be enough room without removing the...