Search results

I apparently received PT-24.11.2 today. I try to follow this thread closely, but I don't recall seeing this one mentioned previously. (Nothing showed up in search, either.) The strange thing is that the description appears to be nearly identical to HVAC-24.5.0, but I received that particular...

Todd, Here are the steps I used (see my post #408 in this thread): 1. Purchase a 2021 IPMA. I used part number ML3T-14G647-FS. I got mine from eBay. 2. Send the 2021 IPMA to Jesse-Infotainment along with your VIN. He can program it to your truck. 3. Install the reprogrammed 2021 IPMA into...

I let the truck update this afternoon. Here are the changes I noted: - MyView, my IPC gauges, and a couple of other SYNC4 settings were reset to their defaults. Typical OTA behavior. - I normally listen to the audio system with the volume set between 5 and 7. Post-update, I have to turn it...

Thank you!

Today, the Ford mothership tried to push the 23-PU1024-6CH-AUD update to my truck for the third time in five months. (The first attempt was in March/April timeframe, second time was in May/June.) I have auto updates turned off, and I've not allowed the truck to download or install this update...

Have you recently received an OTA update? After my truck received 6.2.0, I noticed that my auto high beams weren't working. I had to go back into the settings and re-enable them. Worked fine after that.

Bob, Our trucks seem similar (I don't have a Powerboost, but my truck is a 502a with BlueCruise), so the process I used to add Active Park Assist should work on yours. The solution will require a hardware update and several FORScan changes. Here's what I did: 1. Purchase a 2021 IPMA. I used...

I think you will only get the "Confirm you're the passenger" prompt if the truck detects a passenger in the front passenger seat. At least, that's the only time I can recall seeing it. Otherwise, the keyboard is locked at speed. I haven't checked if the system can be tricked by putting...

I don't tow very often, so i haven't tried it again since my initial testing described in the post above. However, it worked exactly as explained in the manual. The address locations you listed appear to be the correct ones, but the actual hexadecimal changes needed are dependent on the...

An easy thing to check would be the green and/or brown connections on your IPMA. Unplug and re-plug them to ensure they're fully seated. The IPMA connections will be visible on the left side of the truck under the dash (near the driver's left knee). I recently did some work on my IPMA and...

Black leather seats and black carpet. The top of the dash is that gray-bluish denim-like material.

I have a 502a, and that's what my media bin cover looks like. My truck is agate black with the chrome package.

I finally got the opportunity this morning to test APA and AHA functionality. To say I'm impressed is an understatement. After making this mod (and also adding the cupholder lights, media bin light, and glovebox light with @JHForman812's help), the truck somehow now seems... complete... or at...

Absolutely! I just finished making the FORScan changes that Jesse sent. Even though I haven't tested it yet, I can confirm that the APA menu option is now appearing when the Parking button is pressed. More to come soon!

That absolutely makes sense. I'll stand by for additional FORScan info. Thanks, @Snakebitten! Update: just got the FORScan changes from Jesse via PM. I may not be able to finish testing until tomorrow, but I'll get the changes made tonight. Back to the cockpit!

Update: the 360-camera calibration completed successfully and looks just as good as it did before. APA: Pressing the Parking button only brings up the "Navigate to Parking" option. I didn't see a dialogue screen to initiate APA. I checked the vehicle settings but didn't see anything I'm...

@Jesse_Infotainment: good news. I must not have had one of the plugs fully seated. All of the cameras work now. I'll rerun the calibration and let you know how it goes

Got it. I'll unplug/replug and see if that helps.

I just rechecked the connections, and they felt secure. I also rechecked the cameras and have an update: - The bed camera works. - In 360 view, the rear and passenger sides seem to be working. - The rear camera and hitch view are there but washed out really badly. - All of the front views are...

Bottom line up front: I'm trying to get APA and AHA working in my 2022 502A. I need some help to complete the 360-camera calibration procedure after installing the "new" 2021 IPMA. Additional details: Jesse programmed a 2021 IPMA to my truck. (Thank you, @Jesse-Infotainment!) I installed...