Search results

Just curious, so please don't trash me too bad for my ignorance. The powerboost is equipped with a GFCI correct? If so, a ground isn't required right? I thought GFCI would trip based on irregularities between the hots and neutral. For example, a lot of old homes didn't have a ground wire in...

They can be added. I will do a write up once I get the correct wiring.

Yes they can be added. I'm currently adding them to my XLT.

Lane centering is like "Blue Cruise Lite". Honestly a slight touch of the steering wheel every 10 seconds or so and it maintains flawlessly. I get that its not 100% hands free but I get by with it.

My used one on eBay worked and it set me back $299.

I will be super stoked when you have that list together. I'm so busy with work that i have very little time to tinker with different settings.

In forscan you will need to enter your vin # in a hexadecimal format for the CCM module. You can copy the hexadecimal (vin) from your ABS module. Once completed, select the wrench icon in forscan and locate the CCM calibration. Go through the prompts and viola, your done. Basically, all you...

You could be right. I have yet to check C134 for the four extra wires. I was told you could go directly from IPMA to the CCM (easiest way) or from the IPMA to C265 (OEM). If it is not wired from C265 to C134 then I will bypass C265 completely. I will post when I find out. I'm still having...

Here is a quick shot of the front bumper. You can buy the bumper harness already done that will connect at connector 134. From connector 134 it will run to the passenger side kick panel connector 265. At this connector you can pin in and run new wiring to the IPMA depending on what you are...

Yes, I will try to get it together tomorrow.

Jesse, if I remember right you did the 360 cameras on your truck. I have the cameras and the advanced IPMA. Im having issues finding the wiring. Looking on fordparts.com it shows everything having the same part number, besides the letter on the end. Also did you pin the side camera wiring...

FYI, I purchased the complete wiring diagram for our trucks if someone needs to know connector color, number, pinout, and location. I will help when I can.

So I got a great deal on the 360 camera side mirrors. I will be looking into getting an advanced IPMA, front logo cam and high mount brake light cam. I have been unable to find the ML3T14G647NA module, but I was able to find ML3Z14G647J. When I look it up on ford's website it shows them both...

Good morning Jesse. You say the harness runs from the bumper to the fender. Do you have a diagram on that? Driver or passenger fender? Thanks for the help.

Thanks for that. I actually found the correct pins on the old bumper wiring harness that will fit the IPMA connector. Now I just have to see how far the wiring goes from the CCM towards the IPMA. Does it end at the bumper harness connector, or does it continue on further down towards the...

Thanks for that. I will now order an assortment of pins. One day I will have this up and running. Lol.