Search results

After turning left it doesn't correct itself. Has anyone had this issue before? How difficult is it to fix?

So I just called in to book for the 24E04 and this recent 24N04 notices and I was told the 24N04 is just a notice and I don't have to do anything if I don't see any issues with the truck! According to this notice, EGHR may develop a leak at the coolant inlet port, or the EGHR actuator's printed...

I came across a company offering Waxoyl with a 6-10 year warranty at $1,467.87CAD. I am planning to keep the truck for the foreseeable future. What do you guys think about the product and does it really last 6-10 years?

Cold day so I remote started for the PB to warm up. Got in the truck before the remote starter timer expired and proceeded to start the vehicle. Nothing unusual as I do the same routine almost every day. As soon as I started backing out of the driveway, I noticed a hard stiff steering so I knew...

I have a full Talon skid plate and want to know if it is necessary to remove them along with the spare wheel before having the rust proofing applied. Thanks!

For those who have this on the front of their truck, It leaves a permanent mark on the bumper which could potentially invite rust. I have used an electrical tape to introduce some protection but I am looking for a more reliable solution.

Finally I purchased one and I am happy I did! I ordered the biggest one and these frames are freaking heavy. 103lbs each! Pictures show the lift points and the casters I installed to help with moving them across the garage floor. I also installed an electric hoist to help with hanging them on...

If it’s real, I truly feel sorry for her!

I am posting this here to figure out what exactly EGHR is and if Ford Canada is trying to place a stiffer emission control device or simply trying to be proactive with a faulty part.

This is how much stuff was collected after 3 weeks/800km. Strong smell of fuel! of

I was calibrating my speedometer through Forscan when I noticed I have 3 DTCs! I have no check engine light and truck seems to be running fine! P2601, U0422 and U0565. I want to have as much knowledge as possible before taking it to the dealership. I reset all of them but they keep coming back.

I have a screw short box F150 and a 2020 BMW 330i. I measured the Lift point spread on F150 to be 50" and the BMW is 70". They don't have a single lift to cover both of these measurements. 6000ELX minimum and maximum lift point are 53" and 76" respectively. I measured the F150 from the arrow as...

I just came across this in Instagram!

I want to get the aluminum one but not sure if 4" or 6" would be a better selection. I don't have the max-tow package and truck is levelled on LT285/65R20 tires. I don't think I would ever tow more than 5000lbs but you never know.

Finally was able to get my hands on these tires. Definitely there is a low level hum compared to Hankooks but nothing that bothers me. Speedometer is off by 2miles/hr and will be corrected through Forscan soon! I now have 4x 275/60R20 Hankook Xtreme with 12/32 thread depth. I will be listing...

Just when I was saying I love my truck and I can’t easily be intimidated by hiccups, truck decided to be antsy with me! It drives fine at all gears and speeds but I get a kick that feels it’s coming from my rear end every time the truck leaves from a stop. The first time it happened I thought I...

I connected this to the truck last night and it started blinking the first light. This morning after nearly 12hrs it is still blinking the first light. Is this charger not strong enough or there are other issues at play?

First off, the ride is less bouncy but I am still running the standard tires and I am getting 1.5" of lift. Plan to change to LT tires which I think will firm up the ride. I completely went a different route than the instructions which was provided by Eibach. Mainly, I removed the lower control...

Are there a brand that is better than OEM for the two batteries? I had a new 2017 Land Rover which kept acting up right off the bat and dealer couldn't figure out the problem so I took to the forums and long story short, few members were pointing to the problem being caused by the battery. When...

Pretty straight forward to install with basic shop tools. Took me 2.5 hours but it could've been done in half that time. Roush instructions were clear but some stuff didn't apply to my model. I have attached some pictures below with some notes on them. Number of reasons why I decided to do this...