Sponsored
rugedraw's latest activity
-
rugedraw replied to the thread ECU module programming guide using FDRS.Not from Ford. You need to roll back the software in the DSM with FORScan beta. That is the only fix we know of. -
rugedraw reacted to bilnc's post in the thread BlueCruise Upgrade Experience (1.0 → 1.3+/1.4-ish): Worth It, but its work with
Like.
I just finished a long I-40 / I-26 run (NC ⇄ Charleston, SC) after completing the full BlueCruise firmware + config upgrade, and I... -
rugedraw reacted to Porpoise Hork's post in the thread Trying to change my VIN in the PCM to match the VIN of the truck with Haha.
-
rugedraw reacted to SilverPigeon's post in the thread Trying to change my VIN in the PCM to match the VIN of the truck with Haha.
Beat me by 4 minutes 🤣
-
rugedraw replied to the thread Trying to change my VIN in the PCM to match the VIN of the truck.VIN is stored in the SOBDMC, SODCMC, IPMA, BCM, HVAC, HCM, RCM, ABS, CCM, SODR & SODL. Good luck!
-
rugedraw reacted to deagle2008's post in the thread 2021+ F150 Power-Up and Priority OTA History Thread with Like.
I think i got this couple days ago. No notification other than the dash making the noises instead of the speakers. Don't see this one on...
-
rugedraw replied to the thread 2021+ F150 Power-Up and Priority OTA History Thread.Same verbiage as PT-25.12.2 that was sent to the 2024+ trucks. I will add it to the 21-23 tab now.
-
rugedraw reacted to svtzx2's post in the thread 2021+ F150 Power-Up and Priority OTA History Thread with Like.
Service advisors at dealerships can also check using PTS. I had to teach a few how to check outstanding modules, but if you have a good...
-
rugedraw replied to the thread BCM programming procedure.This truck is not connected to Fordpass, so I am limited as to what I can see. The only thing I can think of is to disconnect the...
-
rugedraw replied to the thread BCM programming procedure.Are you using FDRS? What is the verbiage mentioned with the B108E DTC you are seeing? 2024+ F150 has a different module architecture...
-
rugedraw replied to the thread 2021+ F150 Power-Up and Priority OTA History Thread.Agreed. $28 is a much better option than $120 for a 2 day FDRS pass to check these things. If anyone does this, they can also...
-
rugedraw reacted to Snakebitten's post in the thread 2021+ F150 Power-Up and Priority OTA History Thread with Like.
But someone can get their own short term PTS subscription for a very reasonable fee (~$28) and then authenticate access to their own VIN...
-
rugedraw replied to the thread 2021+ F150 Power-Up and Priority OTA History Thread.Yea, we can't run VINs in FDRS anymore without being plugged directly into the vehicle or they ban the accounts. My PTS account has also...
-
rugedraw reacted to digitaltrucker's post in the thread 2021+ F150 Power-Up and Priority OTA History Thread with Like.
I don’t think they can anymore without being connected to it. Ford tightened the screws down.
-
rugedraw reacted to PBM's post in the thread Help — BlueCruise not showing up under Connected Services with Like.
@rugedrew, I’m having the same problem as all updates have been completed and activated using FRDS and still no BC populating on...
-
rugedraw replied to the thread ECU module programming guide using FDRS.I saw your other posts about this with @Ajzride but I am not sure if anyone has tried it. TRON does not check for the VIN to match, but...
-
rugedraw replied to the thread 2021+ F150 Power-Up and Priority OTA History Thread.Added this one to the 2024+ tab of the spreadsheet.
-
rugedraw reacted to Pcabe5's post in the thread 2021+ F150 Power-Up and Priority OTA History Thread with Like.
Got this one today.
-
rugedraw replied to the thread B&O (Not unleashed) amp wiring diagram.Assuming you have the 7-speaker system, here you go.
-
-
rugedraw replied to the thread '24 LARIAT - Center Screen Blank.Ok, lmk when you do and I will check again.
-
Thank you for this, 1 in every 10 starts(ish) I actually get the screen up for a few moments, if this happens i'll be sure to turn on...
-
rugedraw replied to the thread '24 LARIAT - Center Screen Blank.I got your message, but it seems like you have certain data sharing options turned off. I am unable to see the codes even though it...
-
-
rugedraw replied to the thread Emojis causing my recently swapped 12" cluster to reset?.I message you in a bit.
-
rugedraw replied to the thread '24 LARIAT - Center Screen Blank.Have you checked it for codes? If your Fordpass is connected, message me the VIN and I can check the codes it is reporting.
-
rugedraw replied to the thread Emojis causing my recently swapped 12" cluster to reset?.Very unlikley FDRS will update it since the p/n will not match what the server has for your truck. I have the IPC files if you want to...
-
rugedraw replied to the thread Need Help cannot get rid of code C1124:56-2F in VDM.Then I'm guessing the VDM will have to nbe calibrated. I am not sure if FORScan has a service procedure for that. In the wrench icon...
-
rugedraw replied to the thread Need Help cannot get rid of code C1124:56-2F in VDM.Try clicking the VDM in ab format mode, scroll to the bottom and hit write all.
-
rugedraw replied to the thread Request VIN Lookup Thread.The option to view that camera at speed is disabled in your IPMA. Replacing the camera will not fix that. If all you care about is...
-
-
rugedraw replied to the thread Request VIN Lookup Thread.I don't see any codes relating to a bad camera. I see a PCM update was sent to you a bunch of times and failed until it finally...
-
rugedraw replied to the thread Rear seat lift without using LMI kit?.I wouldn't think twice about it and just do this.
-
rugedraw replied to the thread ECU module programming guide using FDRS.You can post it in the "for sale" section here or ebay and you'll sell it quick and get most of your money back.
-
rugedraw replied to the thread ECU module programming guide using FDRS.Your truck is one of many affected by the attached SSM. Until Ford gets their shit together, you are updated as much as you can be. The...
-
rugedraw reacted to bigbearbruin's post in the thread ECU module programming guide using FDRS with Like.
I downgraded to the 45.6.8 FDRS and it finally completed the IPC update. Not showing any more software updates available, currently on...
-
rugedraw replied to the thread ECU module programming guide using FDRS.Try the 20 minute battery disconnect too if you haven't already.
-
rugedraw replied to the thread ECU module programming guide using FDRS.When you update it with FDRS and FDRS asks if the update was successful, you select no and FDRS will give you the option to install the...
-
rugedraw replied to the thread ECU module programming guide using FDRS.If the IPC continues to struggle, you will need to try to CAN it in using the cable instad of the USB. It will take 5-6 hours to update...
-
Happy to report that I am now on Sync version 22293 revision 610, which gave me full screen CarPlay. This was after a 5+ hour IPC update...
-
rugedraw replied to the thread How to access FDRS from unsupported country.Ford recently changed their cybersecurity system.....not sure if using a VPN will work anymore like it used to, but you can try that...
-
In case it helps others, two things I did different this time: When formatting my USB, I unselected “quick format” After it prompted...
-
I never saw update successful, BUT for the first time ever I now see a sync version (21146_Product) and revision (145). Hopefully this...
-
rugedraw replied to the thread ECU module programming guide using FDRS.Not really. It is possible that when you update all the other modules, you will see some codes in FDRS that you cannot clear. This is...
-
rugedraw replied to the thread Excessively Loud Popping Noise B&O Unleashed..I cannot speak intelligently on what is going on in your case with your aftermarket goodies. In the case of trucks with the OEM system...
-
-
rugedraw replied to the thread ECU module programming guide using FDRS.Just select no, or force close FDRS and reopen. You can do the other modules while you wait for the APIM update to kick off.
-
My local service dept. picked it up from my work and dropped it back off just after lunch. TCU was replaced and so far the Ford Pass...
-
rugedraw reacted to M.R.F.O.R.D.'s post in the thread 2021+ F150 Power-Up and Priority OTA History Thread with Like.
Looks like the latest TCU update fixed the stored DTC error (TRON) we had for 24 and up.
-
rugedraw replied to the thread If you own a 2021 F150 and you're on Sync 20262, 20301, 20312 or your Sync version is blank and cannot turn on auto-updates, this thread is for you!.Keep it as is. Chances are, the data between your truck and the server is corrupted, so you won't get updates now. The only thing you...
-
rugedraw replied to the thread If you own a 2021 F150 and you're on Sync 20262, 20301, 20312 or your Sync version is blank and cannot turn on auto-updates, this thread is for you!.Truck is on Sync 21008 which is not one of normal Sync versions associated with the F150. It also shows an APIM was swapped into this...
-
-
rugedraw replied to the thread OTA update glare free.No idea. Becuase Ford is ridiculous is the best answer I can give you.
-
24+ do not appear to have the technology available in the refreshed headlights. It's a BIG reason I am hanging on to my 2022 cream puff
-
rugedraw replied to the thread OTA update glare free.Yes, but you lose BC 1.4.
