Recent content by RMaas

Yep they all work fine. I’m not sure if they recalibrated the speedo, but it isn’t off by any noticeable amount.

I do not

I installed the ReadyLift 2.0 kit and put Nitto Terra Grapplers (295X65R20) on the stock wheels with no spacers. No rub here. Ride quality is a LITTLE bouncier, but very minor difference. Between the two changes, I gained about 3.5-inches of height in the front end, and about an inch and a...

Can anyone clarify how to orient/set the adjustable cam nuts for the ReadyLift 2" kit (before taking in for an official alignment). I read the instructions a few times and it's not super clear the way it's worded there.

Have you tried running a miter saw or jobsite table saw? I'm just thinking that those items would offer a similar type of draw, with the brushed motors... Might be worth testing if you haven't already.

So I also emailed Bilstein to get some more specifics about using the 5100s on the 2021, and here's what they had to say: "The 2021 model F-150’s do not take the same damper as the 2020, we’ve already tested it and verified that they are not identical. Using a 2020 B8 5100 product on a 2021...

Any thoughts on installing a catch can before the 1000K mark? I had one on my last 5.0 which will still work with this one – I was thinking about tossing it on, but don't know if I should just wait the 1000 miles.

Which height setting did you use on the 5100’s? All the way up? We’re you nose high at all? Or did you need to add a spacer to the back?