Recent content by Northguy

Looks like -E is the media bin light. -F is the connector to the ring. You think I just need the - E light/connector not the conductor ring- right?

Thanks John for quick reply. I was afraid of that answer. Looks like I will need to reorder the part and replace it.

I did this mod about a year ago (with excellent support and help by @JHForman812 )but now only having about one and half of the cup holders light up ie looks like about half the ring on 1 cup holder doesn't like. Really weird as I thought there was only 1 light ring around the 2 cup holders...

Was just at dealership picking up my truck after getting oil changed - and 2 recalls looked at - Max tow and the parking light flickering. The modules were replaced on the parking lights, and they said no issues with my Max tow bolts (I knew that as I inspect them regularly). However they had...

Ok here goes - debated whether I should say anything. Hey OP - please consider removing this thread. There are lots of other forums to discuss stuff like this. This forum IMHO has been one of the most helpful and incredibly respectful forums I have been associated with. Lots of people helping...

You need to look at your payload on your door jam. I spec'd my truck very carefully to end up with 1850 lbs (I did go with max tow and 20" tires which reduced my payload). Your 6400 lb trailer likely comes close to 7000 to 7400 lbs once it is filled with everything. Use 13% of trailer so...

The issue or depending on your point of view, the advantage of the 1363 lb payload is the options that come on a limited version of f150. Every option reduces your payload. A stock XLT is going to have around 1950 lb payload. Very rough way to look at is that for every 100lbs of extra payload...

@maxis1230 the post above is good advice. The trailer industry always quotes 10% of total weight for hitch wt but as post above highlights u should use 13% for travel trailer. So Trailer @13% fully loaded. - 1300 lbs Hitch. - 100 lbs Total is 1400lbs...

See above - factory reset fixed my issues.

@FordTruckMan helped me out (this forum is great!) Need to factory reset sync. Fixed my wireless project immediately. Don't know about eliminating need to reboot yet but sync loads a lot faster now.

YES this worked! Thanks MATE. I guess I should have thought about this. Connected everything back up. My forscan changes are still all there as far as I can tell. It does load a hell of a lot faster now as well. No long splash screen delay. Hopefully will stop the reset issues I was having.

Great news if that will fix the wireless projection issue and frequent rest. This is the procedure right? Thanks for the quick reply and help. Really appreciate it.

I am having both issues (sync resetting and wireless project greyed out). U make any progress with yours? Do u have the unreal engine turned on thru forscan?

We're u able to get wireless projection being greyed out resolved? I am taking my truck in tomorrow. May be just an ota update that broke something. Want to check to be sure it isn't something like having the unreal engine being turned on in forscan.

Any thoughts on if having the unreal engine turned on thru forscan is creating an issue with wireless projection? My projection is greyed out (wired works fine) and I am taking into dealership this week to have them look at it as well as other regular maintenance