Sponsored
ksdon's latest activity
-
ksdon reacted to bilnc's post in the thread BlueCruise Upgrade Experience (1.0 → 1.3+/1.4-ish): Worth It, but its work with
Like.
I just finished a long I-40 / I-26 run (NC ⇄ Charleston, SC) after completing the full BlueCruise firmware + config upgrade, and I... -
Use Vaseline. It’s what Ford recommends.
-
When I installed the box links, I did it dry with a Milwaukee driver.
-
Self tapping screws are designed to be used dry with no cutting oil, grease, or special lubricants
-
ksdon replied to the thread Box Link thread cutting oil.Thank you for the replies.
-
No oil needed
-
Elbow grease works too.
-
ksdon replied to the thread Box Link thread cutting oil.At my age, elbow grease is a fond memory!!
-
I run +20's, and they stick out just about an inch or so.
-
ksdon posted the thread One more leveling Question in Suspension & Steering - Sponsored by Stage 3 Motorsports.I am trying to figure out my level and the end results. I tow a light load every now and then. Does driving my front tires up and on a...
-
Any oil will work. I use whatever I have when threading . Just go slow.
-
Getting ready to use some Built Right self-cutting screws on my Box Link plates. I don't have any thread cutting oil and live out in the...
-
ksdon replied to the thread Bluecruise dilemma.Good question. And if you know this answer, do you know if I can turn off the obnoxious warning when I choose regular cruise control. It...
-
ksdon replied to the thread Trying to figure off set effect.I like that view it gives.
-
Alloy Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit This works great
-
ksdon replied to the thread Axle Recommendations for a 2025 Lariat?.This is an interesting conversation. The 10 speed transmission with the Eco Boost sure seems like a "do all" combo. With the 3.5 eco...
-
ksdon replied to the thread Rear differential fluid advice needed.If a person wants to run 75w-85 Redline seems to be a good product in the same weight at Ford's. Their literature says it meets Ford's...
-
ksdon reacted to Atlas0331's post in the thread Pics: leveled out 2025 FX4 on Bilstein 6112 front / 5100 rear with Like.
Awesome let me know how it turns out. I got the 20s on mine too with same weak spare tire. That’s why I made it priority to swap it out...
-
ksdon replied to the thread Trying to figure off set effect.Thank you.
-
You are correct. The lower the offset number. The further out the wheel comes from the fender. It won’t be a much noticeable difference.
-
Factory wheels/tires are 20 inch with 44 offset (I believe +) and 275/60R20 tires Wanting to go to Tremor take offs which are 34 offset...
-
ksdon replied to the thread Pics: leveled out 2025 FX4 on Bilstein 6112 front / 5100 rear.Thank you. I think Ford should include a set of skid plate bolt washers, the type that come on many ATV and side by sides. They...
-
ksdon reacted to bhellickson172's post in the thread Pics: leveled out 2025 FX4 on Bilstein 6112 front / 5100 rear with Like.
Here are some shots - a bit muddy lol. On a 24 platinum FX4.
-
ksdon reacted to bhellickson172's post in the thread Pics: leveled out 2025 FX4 on Bilstein 6112 front / 5100 rear with Like.
Nothing. If you have the front skid plate it bolts right up to it.
-
ksdon reacted to bhellickson172's post in the thread Pics: leveled out 2025 FX4 on Bilstein 6112 front / 5100 rear with Like.
Here are the pare numbers if interested.
-
ksdon replied to the thread Pics: leveled out 2025 FX4 on Bilstein 6112 front / 5100 rear.I have not seen one of those. Does the Raptor have a separate transmission plate?
-
ksdon replied to the thread Pics: leveled out 2025 FX4 on Bilstein 6112 front / 5100 rear.Thanks for posting we just got a set of 6112 to install on our FX4. We have 4 inches of rake!!! Our FX4 had factory 20 inch wheels and...
-
ksdon reacted to HammaMan's post in the thread LFP batt installed in-place of 7ah aux batt -- Power draw analysis with Like.
I'll play with this other batt to see if it's a good fit. The issue with easy solutions is the possibility that there isn't temperature...
-
ksdon reacted to JEB's post in the thread LFP batt installed in-place of 7ah aux batt -- Power draw analysis with Like.
@HammaMan . Although it might be difficult to test, I’d be interested to see if an LFP auxiliary battery is able to continue to perform...
-
ksdon replied to the thread Adding weight to bed for ride quality.I live several miles from pavement. Our roads are not terrible buy generally have washboard within 2 days of the county road grader. I...
-
ksdon replied to the thread LED Replacement Bulbs That Are NOT Brighter Than OEM 2024 XLT 303A.Sorry for the headlight comments. I need to read better.
-
ksdon replied to the thread Does Bilstein 6112 coil-over level settle or sag?.Appreciate the testimonies!
-
ksdon reacted to Magician's post in the thread Does Bilstein 6112 coil-over level settle or sag? with Like.
Mine are set at #4 and have been for 2 years with no sag at all. I did initially set them at #5 but the ride was bit harsh for my taste...
-
ksdon reacted to TopOMichXL's post in the thread Does Bilstein 6112 coil-over level settle or sag? with Like.
I set them at 2” and it was not perfectly level, but thankfully not high. I have not noticed any settling. One and one half years. 24...
-
Late 2023 and newer take 433MHz while early 2023 and older take 315MHz.
-
ksdon replied to the thread Factory reset procedure for TPMS - really?.TPMS work on a radio frequency. If the new and old TPMS are not the same frequency they can't communicate with the vehicle. Any ideas...
-
ksdon reacted to JerseyGlock's post in the thread LED Replacement Bulbs That Are NOT Brighter Than OEM 2024 XLT 303A with Like.
You'll be blinding (glare) oncoming drivers, depends on the state law and you may get tickets. You are better off go aftermarket LED...
-
ksdon replied to the thread LED Replacement Bulbs That Are NOT Brighter Than OEM 2024 XLT 303A.If your headlight is a reflector, using an LED build will almost guarantee that the appearance to other drivers will be horrible. LED...
-
ksdon reacted to PowerBoostSoCal's post in the thread Does Bilstein 6112 coil-over level settle or sag? with Like.
I had the 5100s installed with a 1.5" lift in the front. I think they did a 2" setting instead as the truck is really level now ...
-
ksdon reacted to Mt.F150..'s post in the thread Does Bilstein 6112 coil-over level settle or sag? with Like.
Don't be surprised if you end up with more than 2inches at setting 5.. 6112 springs don't seem to sag alot after use
-
ksdon replied to the thread Skid plates and oil changes.Our 2025 FX4 did not have the carpet cover. The RCI trans cover plate really covers up that big gap and should provide a lot of...
-
ksdon posted the thread Does Bilstein 6112 coil-over level settle or sag? in Suspension & Steering - Sponsored by Stage 3 Motorsports.I would like to have 2 inches of level on my 2025 Lariat with 3.5 eco boost non max tow. I have read that some people experience...
-
ksdon replied to the thread 2025 F150 Lariat can not be leveled.Thank you! That seems to be the consensus of those who actually have a level. The dealers who do not even try to do them....I don't know!!
-
I am lifted probably 2.5" front and 1" rear, no issues at all even with Blue Cruise.
-
ksdon replied to the thread 2025 F150 Lariat can not be leveled.Thank you!
-
No adjustments. Everything works
-
I have a 2025 Lariat with FX4 and did 2” ReadyLift puck. No problems.
-
ksdon replied to the thread 2025 F150 Lariat can not be leveled.That is very encouraging!! Did they have to do any adjustment on the Adaptive Cruise control radar? I ask about this because the Ford...
-
ksdon replied to the thread Where to place front dash cam.That's a good idea.
-
Mine is behind the rear view mirror, just barely lower than the mirror so I can see the recording light is on.