Recent content by Jmwillets

Pin #8 specifically states bed/cargo Pin #9 says not used. Thats the only thing that im confused by. Read what's in above the pic of the ECM connector diagram.

So I am getting closer. It appears for the 25 STX what need to happen is from the C408 plug (pins #28 & #31) I need to install 2 pinned wires into this harness (truck side) and run them to the C2280E plug at the ECM. Specifically pin #8 & #9.

Do you (or does anyone) know what would be involved to add dual zone functionality? I will add heated seats (once I find them) so I see the benefit there ( provided the HVAC buttons will properly interface). Other than the chrome knobs what other benefits or features does this mod do?

I have a 25 STX and want to do this as well. Question...does it act as a true dual AC at this point or is it simply an esthetic upgrade?

So it looks like if your fortunate like me and bought all the OEM crap to add simple bedlights, installed everything and did the necessary forscan changes only to realize you just wasted alot of money. If you dont have wires in Pin #28 and #31 of the C408 plug( truck side), you will have to pin...

Agreed. I spent many years in lw enforcement.

I dig it! Its very tactical.

Thank you!!!!

Not the way I did it. It doesnt interface with my SYNC screen like the OEM application does. My BCM doesnt have the "logic". You could always get an aftermarket LED that interfaces with an APP and do it that way. I wanted to use all OEM lights for thier lenses and mounting applications so I...

And they said it couldn't be done! This is using OEM lights converted to a 12v system, not an aftermarket ambient light set-up. You can see I also added illuminated visors and an aftermarket homelink.

I went with leather. Nothing fancy since this is my work truck. And sewing it wasnt that bad. Kind of fun. Ive done my door panels, seats, and armrest to match now.

I went this style from Texascustominterior.com. I had to install it, as in sew it together. It was 80 bux.

Added some contrasting accent stitching to the front seats, all four door arm rests and the center console armrest. Still have the rear seats to do.

There is a decent video on your tube how to do it. I was able to get mine working using it.

Of course....obviously I removed both front seats and separated the cushion from the leanback. I didnt fully remove the covers but exposed enough to access the existing stitching. I used a polyester TEX270 thread with a blunt tip needle. To start i would run the needle through the fist visible...