Recent content by J44snk

Looks like I’m one of the lucky ones, My 2022 502a with the 8 speaker B&O sounds a little better after this Audio update ?‍♂️

nope, they are quite grippy and also age well, this is them after 8 months and 20,000km of Calgary ?? weather

I just did the Glove Box light, Media Bin, Cup Holder, and all 4 door ambient light upgrades on my 22 502a, I followed the PDF instructions on the first post and they were super helpful, I also ran a USB cable through the dash for my vent mounted MagSafe charger so I don’t have to keep opening...

I just did the Glove Box light, Media Bin, Cup Holder, and all 4 door ambient light upgrades on my 22 502a, I followed the PDF instructions and they were super helpful, I also ran a USB cable through the dash for my vent mounted MagSafe charger so I don’t have to keep opening the media bin and...

I use this https://www.parkworld.us/60646-p440.html As I can choose the B side or A side, or if our friends come camping I can power both RV’s from my truck. I just ran the AC on my trailer and it was pulling 1,500 watts with nothing else on, also in case anyone is curious I have the Hard Wired...

I have done about 2,000 KM’s and have not lost one of them. So good so far? I did look at Black Lug Nuts, but the reviews did not look good and with the Dealers using impact guns I was sure they would look crap within a year or two, which is why I went this route.

I just did Caps rather than Lugs

I switched Glare Free on for my 2022 Job 2 F150 with Forescan. blend date July 12th 2022 seems to be working well

Thank you - the waiting game continues

Thanks for offering to check our VIN’s it’s greatly appreciated by all members!! Could you check mine - 1FTFW1ED1NFB58717

Yes I have CCD, but everything is just stock at the moment. Adjusting these values will change things for all drive modes, or just normal mode? Do you know if this effects the headlight leveling?

I'm curious, what did you change in regard to the Values in the VDM module?

I finally got my PC Laptop - I just turned mine on yesterday with FORscan (along with Bambi Mode). July 2022 blend date (Job 2 Truck) I did a quick test last night and it worked awesome - much better than the Auto high Beams But FORscan is showing a DTC error in HCM, but no errors on the...

I live in Calgary as well, and park on my Drive nose down - my 2022 502a PB sounds normal when starting, even last week when it was -20c. I was following this issue from last Winter - and from what I could see this was caused by not enough Oil in the gearbox, which the few posts on this thread...

This is great info, I’m in the process of getting a laptop for Forscan, once I have this - I’ll look into these settings. Thank you