Recent content by dre276

i just checked my IPMA plug and I am also missing the wiring for the CCM. I have the 302a and no 360 camera. bummer...

my dealership tried to update the apim couple of weeks ago and failed. they cant figure out why it wont update...frustrating...

looks like thats going to be my weekend project. Is there any other easier way to access the 15k867B connection without taking off the grill and front bumper?

when you added the CCM, did you have to replace both 12a581A or just a new 15k867b?

got it, keep us posted on the retrofit

Could someone clarify what parts are actually needed to retrofit this on a 302a? The CCM and steering wheel switch only?

do you plan on adding the hvac control to this? It seems that the only control with the heated steering comes with ventilated seat. If that's the case, i guess we would have to retrofit ventilated seats too so we dont have a dead switch

i figured it out. Anyone installing a subwoofer should change the following in forscan 727-01-01 xxxx x*xx xx-- *A after changing the parameter, the overall sound and sub level is awesome

I just installed the Kicker HS10 to a non B&O system. I changed the factory speakers with plug and play aftermarket and sounds a lot better. does anyone know the forscan parameters that should be changed for external sub setup?

could anyone who has successfully completed this do a DIY write up?:)

Jesse helped me with this. You needs changes to ACM and APIM in forscan. When changing ACM data, first copy your factory as built data in ACM and change your data ACM: 727-01-01 X0XX-XXXX-XXXX Leave the rest the same and make that a 0 APIM: 7D0-01-01 XX8X-XXXX-XXXX Leave the rest the same...

That's correct, I used bar stock as you mentioned. The mounts are pretty stable as I had it on the truck for about a year with zero issues. I would still like to see if there's an aftermarket grill to relocate the lights inside. Maybe the aftermarket Raptor grill would work

seems like I don't have that option in mine. Was wondering if anyone knew the codes to enable that feature in Forscan.

i’ve looked everywhere but not seeing the surround sound option in sync4. I had the base sound system but recently replaced the ACM for HD radio. Was wondering if its a forscan change for surround sound

does anyone know if we can enable surround sound in non b&o system in forscan?